Dimensions Outside edge to edge: 33" x 10-3/8" Rough opening: 31-5/8" x 9-1/4"
$149.99
Dimensions Outside edge to edge: 32-3/4" x 10" Rough opening: 31-3/4" x 9"
$149.99
Outer edge to edge (glass & sash): 33 x 10-1/2 Rough opening: 31 -3/4 x 8-3/4
$149.99
This is a door from an Airstream Excella trailer. The compatible years are unknown so please be sure to ask lots of questions before we ship. 68-1/2 x 28-3/16 (measurements taken following the curve).
$599.99
This is a side curved window assembly for an early 70s trailer. This window uses the round bar style lifter that connects at one point on the window. Original vintage part Window type: Side, double pane glass/glass Outer edge to edge (glass & sash): 30 1/2 x 22 Outer edge to edge (frame): 32 5/8" x 24 Frame Rough opening: 31 x 22 1/4
$199.99
Popluar among 1970s+ Airstream & other trailers, 6 1/2" x 5",
$249.99
This lock was used on many Airstream trailers and is no longer produced.
$199.99 $159.99
This is the original glass pane from a mid 70s window. This glass should fit as the outer pane of mid-late 70s windows or the sole pane in a single pane 1969-early 70s window. Fits trailers from the 70s & 80s Original vintage part Window type: Fits single & double Rough opening (+/- 1/8 inch): NA Glass & sash (+/- 1/8 inch): 31-1/8" x 8-5/8" x 3/16" Check out our page on window measurement for more info..
$229.99
This is the large center front window for a mid 70s+ Airstream. You mount the wing windows on either side using a bar that holds them together. Compatible era: Mid 70s+ Original vintage part Window type: Front, double pane glass/glass Outer edge to edge (glass & sash): 43-1/2 x 23-1/2 Outer edge to edge (frame): 45-1/4 x 25-1/2 Rough opening: 44 x 24-1/2
$359.99 - $499.99
This is the trim bezel for a clock & thermostat found in the center of the endcap on some mid 70s trailers. Original vintage part Compatible era: Mid 70s Measurements: NA
$19.99
This is a clock from the center front endcap on a mid 70s trailer. It usually sits in tandem with a thermostat. It uses 2 AA batteries. Original vintage part Compatible era: mid 70s Measurements:
$19.99
This is the reinforcing, joining trim piece that sits between the single piece, wrap under wheel well trim found on mid 70s trailers and the skin. Original vintage part Compatible era: mid 70s Measurements:
$99.99 $89.99
This is the plexi/aluminum bifold privacy door found on some mid 70s rear bath Airstream trailers. Original vintage part Compatible era: Mid 70s Measurements: 49" x 32-1/2" when open
$149.99
This is an access door from a vintage Airstream trailer. Compatible era: 1969 + Original vintage part Outer edge to edge (door): 20-1/4 x 14-1/4 Outer edge to edge (frame): 18-1/2 x 12-1/2 Rough opening (frame):
$109.99 - $169.99
This is the original aluminum weather cover for the refrigerator vent on 1970s & 1980s trailers. Original vintage part Compatible era: 70s-80s Measurements: 28 x 8-3/4 outside
$109.99 - $159.99
This is the fridge roof vent from a 1970s trailer. This part goes underneath the weather cap. Original vintage part Compatible era: 1969-1980s Measurements: Edge to edge 22 x 6-1/2, rough opening 21 x 5-1/4
$79.99 - $119.99
This is a roll up cabinet door for a mid 70s to 80s trailers. Original vintage part Compatible era: Mid 70s-80s Measurements:
$29.99
This is the part that holds your entry door open. It can be made to fit most airstreams from the 60s to the 90s. Original vintage part Compatible era: 60s+ Measurements: NA
$19.99 - $28.99
This is the control console from a mid 70s trailer. Its functionality is unknown and it does have some physical damage as shown. Original vintage part Compatible era: 70s-80s Measurements: NA
$69.99 $49.99
This is an adjustable reading light from the endcap on a mid 70s trailer. Original vintage part Compatible era: Early 70s-80s Measurements: NA
$19.99 - $34.99
This is a sliding door release/lock pin from an Airstream trailer. It is spring loaded to keep the door close while towing. Original vintage part Compatible era: Various Measurements: NA
$18.99
This is a hanger divider, designed to keep your clothes from sliding wildly while towing. It is from a mid 70s Airstream but compatible with any trailer. Original vintage part Compatible era: Any Measurements: NA
$9.99
This is the strike that pairs with the cabinet door handles that clasp shut to secure while towing. Original vintage part Compatible era: Mid 70s Measurements: NA
$4.99
These are the cabinet door handles that clasp shut to secure while towing. Many of the brown handles have discoloration from age. The pictured example is a worst case of what you would receive. Original vintage part Compatible era: Mid 70s Measurements: 3-3/4" x 2-3/16"
$14.99
You have seen 24 out of 295 products
We have a number of hard-to-find vintage Airstream parts for your 60s, 70s and 80s camper trailer in stock now. If you can’t find what you need, drop us a line to let us know what you’re looking for and we will contact you first the next time we come across it. We have an ever-changing inventory, so what you see here may not be what you see next week. And don’t forget, shipping is always free!
Shop interior parts, exterior parts, systems, and other Airstream components.
