Shop pre-owned professional tools for every trade at ZeereeZ. Browse power tools, hand tools, diagnostic equipment, electrical testers, HVAC and refrigeration tools, plumbing and hydraulic equipment, measuring tools, welding gear, and workshop essentials from trusted brands.
Tools
-
Kimball Midwest Kimball Midwest 82-6627 Roto-Kut 2" 14A Variable Speed Magnetic Base Drill Press
2" DEPTH OF CUT (D.O.C.) ROTO-KUT™ DRILL - With a cutting capacity of 2" diameter and 2" depth, the Roto-Kut™ Magnetic Base Drill can be used to quickly create holes in a variety of ferrous material applications. POWERFUL MOTOR - Powerful 120V, 14 amp motor provides fast hole creation. VARIABLE SPEED - Two gears and a variable speed motor allow speed adjustment from 100 RPM to 500 RPM to optimize cutter life and performance. SECURE MAGNETIC BASE - A powerful electromagnet holds the drill secure with 3,035 lbs. of pull on 1" thick steel. The power button on the back panel has two LEDs - green indicates full magnetic adhesion, red indicates reduced adhesion (the drill will still operate). CUTSMART TECHNOLOGY - The built-in CutSmart display on the back panel displays the optimal feed pressure for maximum drill life and cutting speed. The progressive LED display will show green under optimal feed pressure, yellow to warn of too much pressure, and red to warn of overload that could damage the cutter. Excessive force will shut off the motor to preserve cutter life. The drill can be restarted to continue drilling. REVERSIBLE MOTOR - The reversible motor allows the drill to also be used with taps for tapping holes. INTEGRATED CUTTING FLUID RESERVOIR - The attached cutting fluid tank requires no setup other than attaching the included tubing between the coolant shut-off valve and cutter arbor. VERSATILE - The included 3/4" Weldon shank arbor and 1/2" Jacobs style chuck allow use with annular cutters or standard drill bits (or taps) for maximum versatility.
$750.00 $675.10
-
Kimball Midwest Kimball Midwest 22-827 DC Circuit Check 2 Polarity & Continuity Tester
QUICK VOLTAGE IDENTIFICATION - Identifies voltage, polarity and continuity in 6 - 48VDC electrical systems with a simple touch of the probe.Displays the voltage and illuminates red for positive voltage and green for negative (ground) voltage. QUICK CHANGE PROBES - Simply pull the probe out of the handle to remove; push into the handle to reinstall. No set screws, turning or other tools required.Includes two straight probe tips (long and short), insulated piercing probe and an alligator clip. REPLACEABLE LCD DISPLAY - Display board \[K-M No. 22-827-1\] can be replaced in seconds if it becomes damaged, reducing downtime and extending the life of the tool. EASY TO USE - Simply attach the coiled alligator clip to a bare metallic surface on the equipment to provide a ground.Touch the probe tip to the wire, connector or component being tested.The LCD screen will display the voltage and indicate the polarity. SPECIFICATIONS:Operating Voltage: 6 - 48 VDCLCD Indicator Display: Illuminates Red = Positive Illuminates Green = NegativeProbe Tip: Stainless SteelCoil Length: 12' (extended)Current Draw: <10 milliamps>
$25.00 $24.05
-
Unbranded Universal 4-Cylinder Carburetor Synchronizer for Motorcycle Carb Balancer Gauge
Application:For Motorcycle 2 3 4 cylinder carburetor and fuel injected throttle bodies Specification:Material: Alloy + RubberThe calibration unit is cm Hg (range: 8-42 cm Hg).
$60.00 $57.05
-
Dewalt DEWALT DWS535B 7-1/4" (184mm) Worm drive Circular saw w/ Electric Brake
The DWS535 7-1/4 In. worm drive circular saw has a 15 Amp motor that delivers 4,800 rpm and features 53-degree bevel capacity for advanced applications. Lightweight and durable magnesium construction for optimum user handling, comfort, and strength includes electric brake which stops blade after the trigger is released. Lightweight magnesium and aluminum construction including durable magnesium footplate Extra wide saw hook accepts materials up to 2-3/4-in wide Tough cord protection with 4X better cord-jerk protection 53 Degree bevel with stops at 22.5 and 45 53 Degree bevel capacity for advanced applications Bevel detents at 22.5 degrees and 45 degrees for fast and accurate setting to common angles Dual rip ports to accept available DWS5100 12-in dual port rip guide Top-accessible spindle lock enables easier and faster blade changing Electric brake stops blade after trigger is released
$135.00 $121.10
-
Mac MAC TOOLS MPF59038 3/8" High Power Pneumatic Air Ratchet
Dual-drive system enables easy changing between 3/8" and 1/2" drive providing added versatility over traditional fixed-anvil designs
$150.00 $135.10
-
Kreg Kreg KPS6512 Corded 12 Amp 6-1/2 Inch 120V Motor Plunge Track Saw
High-performance, track-guided circular saw for precisely cutting plywood and solid-wood boards! The Adaptive Cutting System Plunge Saw offers powerful cutting performance with a variable-speed motor with an electronic blade brake. It provides safe cutting with plunge-cutting action, a fully shrouded blade, a retractable riving knife, and integrated anti-kickback features. The Plunge Saw is versatile, too, with bevel cutting capability from -1° to 47°, and 2-1/8" maximum cutting-depth from the included 48-tooth, carbide-tipped blade. With a 12-amp motor the Plunge Saw delivers cutting power, plus control from variable-speed and an electronic blade brake. An included dust port and bag collect chips to minimize cutting mess and provides the ability to connect to a vacuum hose. The Plunge Saw is designed to work with the Adaptive Cutting System 62" Guide Track to deliver straight, smooth, splinter-free cuts in solid wood, plywood, and other sheet goods. Plus the saw offers integrated safety and ergonomic features that make it easy and safe to use. The saw’s blade-left design is optimized for right-handed users, and provides superior cutting visibility and control. Two-year saw warranty. Plunge-cutting circular saw for cutting solid wood and plywood when paired with the Kreg 62 Inch Guide Track Powerful 12-amp, 120-volt variable speed motor with load compensation Safe with fully-shrouded , retracting blade, riving knife, electronic blade brake, and anti-kickback control Blade-left design is optimized for right-handed users, and provides superior cutting visibility and control High-capacity cutting with 2-1/8 Inch maximum cut at 90° and 1-1/2 Inch at 45° Adjustable for making bevel cuts from -1° to 47°
$230.00
-
Matco MATCO MD251 Tools Digital Multimeter Tester w/ Leads
The Matco MD251 is a professional-grade handheld True RMS digital multimeter with a 6000-count display and auto-ranging functionality. Designed for automotive and electrical troubleshooting, it measures AC/DC voltage (up to 1000V), current (15A max), resistance, capacitance, frequency, and diodes, while featuring safety perks like a "Beep-Jack" warning.
$75.00 $71.05
-
3M 3M 88936 5 in Non-Vacuum 3/32 in Pneumatic Random Orbital Sander
Lightweight, comfortable design Soft touch grip with molded-in grip features Powerful 0.28 HP (209W) pneumatic motor Simplified paddle design allows users to easily identify orbit Stays cool and comfortable while running Three variable speed settings The 3M™ Pneumatic Random Orbital Sander combines durable, lightweight construction around a powerful precision-balanced motor for professional performance and a swirl-free finish — great for high-production industrial environments where dust extraction is not required.
$140.00 $126.10
-
Matco Matco Tools MT2769 1/2” Impact Wrench Heavy Duty Air Pneumatic Tool
Matco Tools’ 1/2" Impact Wrench, No. MT2769, offers a breakaway torque of 1,300 ft/lbs. An exclusive easy-change muffler design allows for effortless servicing and sound level adjustment. A one-hand forward/reverse push-button design, reinforced clutch mechanism, rear housing power adjustment and a tip valve variable speed throttle provide techs with power and speed. Textured housing provides an ergonomic grip, which promotes comfort and durability when using the tool, resulting in less user fatigue and more comfortable operation for the long haul.
$99.99 $80.20
-
Snap On Snap On CT8850HV USA 18V 1/2" Drive Cordless Impact Wrench
The Snap-on CT8850HV is a high-performance 18V 1/2" drive cordless impact wrench designed for professional automotive use. It features 600 ft-lbs of torque output, a durable brushless motor, and a high-visibility housing, offering high torque for heavy-duty fastening and loosening tasks. Key Features and Specifications: Power: 600 ft-lbs torque output, with a reported 750 ft-lbs bolt breakaway torque. Speed: 1,900 RPM free speed. Impact Rate: 2,280 blows per minute. Design: Part of the CT8850 series, featuring an ergonomic cushion grip to reduce fatigue. Battery: Uses 18V MonsterLithium batteries, with a 60-minute charge time. Build: Heavy-duty motor with a heat sink to protect the switch. Variants: The "HV" designation often indicates a high-visibility color option within the CT8850 product line
$200.00 $130.35
-
Snap On SNAP-ON CTC772A, 7.2v -14.4V LITHIUM Battery Charger
• Charges all 7.2 V and 14.4 V Lithium batteries
$75.00 $71.05
-
Hitachi Hitachi DS 18DGL 1/2" 18V Cordless Driver Drill
Covered by Hitachi's lifetime lithium ion tool warranty and 2-year lithium ion battery warranty, the DS18DGL features a compact, yet efficient 1.3 Ah (x2) battery. With 400 In./lbs of torque, this drill can power through any tough job with ease. A convenient LED light illuminates dark spaces, and a keyless 1/2 In. chuck provides simple bit replacements. The DS18DGL also features a 22+1 stage clutch with 22 torque settings and a drill mode for precision and control. This tool is sure to be a favorite around the jobsite. Powered by lithium ion battery technology for less weight and fade-free power Powerful 400 In./lbs of torque to handle tough jobs in tight spaces Two-speed gear setting to match the appropriate speed to the application 22+1 stage clutch delivers 22 torque settings and a drill mode for ultimate precision and control LED light effectively illuminates dark work spaces 1/2 In. keyless chuck for quick and simple bit replacements Responsive variable speed trigger provides complete control during operation
$29.99 $28.05
-
Skil Skil QC5359B-02 20V PWR CORE 20 Dual Port Auto PWR JUMP Power Tool Battery Charger
SIMULTANEOUS CHARGING - Charges any two PWR CORE 20 batteries simultaneously AUTO PWR JUMP CHARGING - Charges 0-25% in just 5 minutes (based on 2.0Ah battery) ALWAYS KNOW CHARGE STATUS - Clear LED indicator lights show when batteries are fully charged PWR CORE 20 SYSTEM - Pairs with any SKIL PWR CORE 20 Battery
$74.99 $71.05
-
Skil SKIL BY519601 PWRCORE 20 Lithium 4.0Ah Battery 20V Max with Fuel Gauge
Compatible with 20V SKIL power tools Recharges in 30 minutes Always Know Charge Status—Green LEDs show status, so you always know how much charge is left POWER ON THE GO—Plug in to the battery’s USB port wherever, whenever with PWRAssist™ mobile charging. Charger sold separately
$45.00 $43.05
-
Milwaukee Milwaukee 5546-21 1-3/4 in. SDS-MAX Corded Combination Rotary Hammer Drill
Our 1-3/4" SDS Max Rotary Hammer has a powerful 15A Motor capable of delivering 8.1 ft-lbs of impact energy for the most demanding applications. The AUTOSTOP™ E-Clutch prevents over-rotation of the tool in case of tool lock up giving you a more controlled experience while using the corded rotary hammer drill. The variable speed dial allows you to set the optimal speed per application while two modes, Rotary Hammer and Hammer Only, allow you to easily switch between drilling large holes or do chipping applications. When chipping, a lock-on button allows you to chip without constantly pulling the trigger. Built-in Advanced AVS (Anti-Vibration System) minimizes the vibration you feel while using the rotary hammer drill.
$219.99 $187.15
-
CST/berger CST/berger 19-557 Magna-Trak MT 102 Magnetic Locator with Soft Case
Length: 42-3/4"; Weight: 3 lbs./1.3kg Waterproofing: The unit is waterproof up to the housing and features a water-resistant housing, ensuring durability in various environmental conditions. Signal Indicating LCD Meter: Available on models 100 and 102, the LCD meter provides a visual signal indication, enhancing the accuracy of location tasks. Easy Access Battery Compartment: The design includes an easy-to-access battery compartment, making battery replacement quick and hassle-free. Controls: The locator features intuitive On/Off, Volume, and Sensitivity controls for user-friendly operation. Construction: Made with a strong, lightweight aluminum tube, the Magna-Trak 102 is built to withstand the rigors of fieldwork while remaining easy to handle. Advanced Sensors: Equipped with "High-Tec" magnetic toroidal sensors and patented electronic balancing circuitry, this locator offers high precision and reliability. Durable Tip: The unit is fitted with a durable hard rubber tip for added protection during use. Battery Life: The locator offers approximately 100 hours of battery life, with a low battery indicator on LCD models to ensure you're never caught off guard. Carrying Case: Comes with a soft carrying case for easy transport and storage. Applications The CST/berger Magna-Trak 102 is ideal for a variety of applications including: Locating property markers, water lines, and pipes Finding buried ferrous objects such as survey stakes, nails, and drums Utility work including locating manhole covers and valve boxes Construction projects requiring the detection of rebar and other metallic objects Why Choose the CST/berger Magna-Trak 102? The Magna-Trak 102 offers a blend of advanced technology and user-friendly features that make it a valuable asset for professionals. Its durable construction ensures long-lasting performance, while the intuitive controls and clear LCD display make it easy to use. The added safety feature of the power line indicator provides peace of mind during operation. Invest in the CST/berger Magna-Trak 102 Magnetic Locator for accurate, reliable, and efficient location of ferrous objects in any environment. Its advanced features and robust design make it the perfect choice for your professional needs.
$399.99 $380.05
-
Skil SKIL CR5429B-00 PWR CORE 20V Brushless 7-1/4" Rear Handle Circular Saw Tool Only
DELIVERS UP TO 600 CUTS PER CHARGE (based on 2x4 crosscuts in SPF lumber) CUTS 3X IN ONE PASS – Powers through tough materials with 2-9/16 In. depth of cut CORDLESS CIRCULAR SAW WITH 40V POWER – Powered by two PWR CORE 20™ 5.0Ah lithium-ion batteries, this 7-1/4 In. Rear Handle SKILSAW puts the cutting performance of a corded worm drive in a cordless saw DIGITAL BRUSHLESS MOTOR – Intelligent power management maximizes power and extends tool life 25% LONGER RUN TIME - PWR CORE 20™ lithium-ion battery technology wraps each cell with cooling material to keep the batteries powering on for 25% longer run time and 2X battery life 15-MINUTE CHARGING – Innovative Dual Port PWR JUMP™ charger recharges both batteries from 0-25% in just 15 minutes, or 100% charge in under an hour DUST CONTROL – Adaptable dust port in the auxiliary handle directs sawdust away from the work area ELECTRIC BRAKE – Maximize jobsite productivity and reduce downtime between cuts 24-TOOTH CARBIDE-TIPPED BLADE – Provides smooth and accurate cuts again and again
$169.00 $135.20
-
Fieldpiece Field Piece SMAN460 Wireless 4-Port Digital HVAC Manifold
The SMAN460 wireless four-port digital manifold is the top-of-the-line Fieldpiece manifold. It has more features and benefits than any other manifold on the market. With target superheat automatically calculated, simultaneous superheat and subcooling, all 9 measurements displayed on the large, easy-to-read screen, extra large 3/8 ft full bore and 4th VAC port, and wireless measurements for real-time system diagnosis and charging, the SMAN460 is the manifold HVACR pros trust to do more. Coupled with the JL2 job link transmitter and the SDP2 dual in-duct psychrometer, you get all your readings in the job link app as well as pre- and post-work check lists, in-depth system diagnostics, report emailing, and cloud storage for all work completed. Plus it has a built in micron vacuum gauge with gives technicians the ability to set high and low alarms, and a stopwatch, as well as view the micron rate of change. Fieldpiece Wireless 4-Port Digital Manifold and Micron Gauge, +/-0.2 in HgV for 29 in HgV to 0 in HgV Accuracy, 0.1 psi/inHg Resolution, 5 in Blue Backlight, AA Battery, -95 to 999.9 deg F
$299.99
-
Hilti Hilti SFH 144-A Cordless 2 Speed Hammer Drill Driver
The SFH 144-A cordless impact drill/driver excels by providing the best performance to weight ratio in its class. Featuring a lithium-ion battery and Hiltis Cordless Power Care (CPC) system, the tool offers very high battery capacity despite its exceptionally light weight. Its ideally balanced T-design and generously-proportioned synthetic rubber surfaces ensure superior working comfort for high productivity. A powerful, high-torque motor guarantees consistently high performance when drilling in wood or metal. The typical Hilti characteristics of this tools compact design confirm its professional aspirations.
$49.99 $47.05
-
Kobalt Kobalt KDPC 124-03 24v Lithium-ion Dual Port Power Tool Battery Charger
Recharge your batteries even faster with this Kobalt 24-volt Max 2-Port Charger. Compatible with all 24-volt Max Li-ion batteries, this system charges two 2.0Ah batteries at the same time in 75 minutes, minimizing downtime on the job. Strategically designed to be placed on a workbench or conveniently mounted on a wall using the built in keyhole slots. Two LED charge indicators, allow easy monitoring to determine when your batteries are returned to full power. AC/corded 2-port battery charger used to charge Kobalt 24V batteries; no batteries included Kobalt 24-volt 2-port charger can charge up to 2 batteries at the same time Charges (2) 2.0Ah batteries in 75 minutes 60 watts of charging power (each port) 6 ft power cord Two LED charge indicators Designed to stand on a workbench or be mounted on a wall
$59.98 $57.05
-
Carlyle Carlyle CDTW38 3/8 Inch Drive Flex Head ft. lbs., in lbs., N-m kg-cm Digital Torque Wrench
The Carlyle 3/8 in. Drive Torque Wrench with Flexed Head is the ultimate tool for automotive technicians who demand precision and reliability. This professional-grade torque wrench is engineered for accuracy, featuring a 36-teeth flex head ratchet with quick release. Its digital and angle meters offer precise torque application, while the audible alarm and 12 LED indicators provide clear feedback, even in low-light conditions. With the ability to measure in ft. lbs., in lbs., N-m and kg-cm, this versatile tool adapts to any task. The comfort grip and durable design, constructed from hot forged Chrome Vanadium (CR-V) alloy steel, for long-lasting performance. Plus, with a memory recall feature for 50 data points and 9 pre-settable angles, this Carlyle hand tool is as convenient as it is powerful. The Carlyle 3/8 in. Drive Torque Wrench is a must-have for any serious technician.
$259.99 $169.35
-
Hilti Hilti B 22/5.2 22V 5.2 ah Li Ion Power Tool Battery
22V 5.2Ah Li-ion battery for extended running time High-capacity battery providing the highest work-per-charge rating in its category and thus the longest running time with all Hilti 22V tools The latest CPC technology allows higher charging accuracy for longer running time and intelligently monitors each cell for improved performance Fully sealed electronics for increased protection against dust, humidity and water The rubberized, glass-fiber reinforced casing is up to 4 times more robust and resistant to damage from dropping and twice as resistant to temperature than standard ABS plastic Rugged internal construction helps protect the battery cells and electronics for longer life Compatible with the entire Hilti 22 V cordless tool range Compatible with the entire Hilti 18 V and 22 V cordless tool range Compatible with all Hilti C4/36 Li-ion chargers Applications in extreme temperature conditions – from 60° C down to -20° C Applications in extreme temperature conditions – from 140° F down to -4° F
$49.99 $47.05
-
Toro Toro 88602 Genuine OEM 60V MAX* Flex-Force 2 Amp Lithium-Ion Battery Charger
Charges all batteries in Flex-Force Power System Light indicators noting state of charge and battery Table top or wall mount option Monitors battery health to maximize the battery lifespan
$59.99 $57.05
-
Mathey Dearman Mathey Dearman 2SA Pipe Beveling Saddle Machine 6 - 12" Beveler
PORTABLE—The light compact unit is an excellent tool for shop or field applications. ACCURATE—Precision spacer bolts, located on both sides of saddle, provide stability and accuracy that result in high-quality cuts every time. EASY SET-UP—Requires little to no operator training to set up and achieve an accurate cut. PROVEN—The saddle, ring gear and cap ring are made of 713 aluminum alloy and hard-coat anodized to create a tough bearing surface for years of accurate cutting and beveling. ADAPTABLE—Can be used with most oxy/fuel or plasma machine torches with a 1 3/8" (35 mm) barrel diameter. BUILT TO LAST – Mathey saddle machines have been working in the harshest environments on earth for more than 80 years
$899.99 $810.10
You have seen 288 out of 1669 products
