Shop drills, drill presses, rotary hammers, screwguns, drivers, and impact tools for workshop and jobsite tasks.
Tools | Drills, Drivers & Impact Tools
-
Bostitch BOSTITCH SB150SLBC-1 3/4-Inch to 1-1/2-Inch Air Pneumatic Cap Stapler
The Bostitch SB150SLBC-1 is a pneumatic 2-in-1 combo brad nailer and finish stapler that drives 18-gauge brad nails and narrow-crown finish staples from 5/8"" to 1-5/8"" in a single tool. Operating at 70–100 psi with 135 in-lb of driving power, this lightweight 2.6 lb aluminum tool is ideal for interior and exterior finish and trim, furniture, cabinet work, staircases, paneling, and crafts. Features include an adjustable depth guide for consistent countersinking, tool-free adjustable exhaust to redirect air away from the user, a 100-fastener magazine, and a no-mar tip to protect work surfaces.
$79.99 $76.05
-
Bostitch Bostitch SL1838BC 18-Gauge Cap Stapler 5/16” Crown, 3/4” - 1-1/2”
Save time and energy when you use the Bostitch SL1838BC 18-Gauge Cap Stapler to secure felt, house wrap, roofing paper, or thin foam into sidewall sheathing and roof sheathing. With the option to fire sequentially or on contact, the Bostitch SL1838BC is an easy-to-handle, lightweight tool that features tool-free depth adjustment, rear exhaust, and a convenient belt hook that frees up your hands for other tasks. SL1838BC 18-Gauge Cap StaplerAt a Glance: For securing felt, house wrap and thin foam into sidewall and roof sheathing Lightweight design with over-molded grip and convenient belt hook Rear exhaust prevents blowback in face of user Oversized foot compensates for uneven building surfaces and provides sequential/contact/off trigger selection Adjustable depth of drive lets you set staples to desired depths
$109.99 $99.10
-
DEWALT Dewalt DCF610 12V MAX 1/4" Brushed Keyless Cordless Screwdrive
Compact, lightweight design of the cordless screwdriver fits into tight areas 3 LEDs of the rechargeable screwdriver provide light and increased visibility without shadows One-handed loading 1/4-inch hex chuck of the powered screwdriver accepts 1-inch bit tips
$32.99 $30.10
-
HITACHI Hitachi Metabo N3808AP 1-1/2" 18-Gauge Cap Stapler Gun
APPLICATIONS: Ideal for roofing felt, foam insulation, and house wrap LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths CAPACITY: Basket holds 200 caps and magazine holds 200 staples PERFORMANCE: Provide superior hold and shear values than common 3/8 In. systems TRIGGER: Two triggers, red for sequential firing and black for bump firing
$119.99 $108.10
-
Ryobi Ryobi HP41L Rechargeable Lithium-Ion 4V Cordless Screwdriver
The lightweight Ryobi® 4V Lithium-Ion Screwdriver with LED light can screw 4x more screws per charge then the competition and holds the charge for 2 years. The LED light works well to illuminate the work area especially in tight, dimly-lit spaces. The 1/4" SpeedLoad+™ quick-connect chuck works with all SpeedLoad+™ accessories and is the fastest, most convenient way to change bits. A 12-position clutch allows user to adjust torque to match a variety of applications. In addition to these great features the 4V Screwdriver comes equipped with a 6-piece bit set with bit holder and tool bag to organize screwdriver and accessories. It is perfect tool for smaller applications for home owners and professionals alike.
$29.99 $16.99
-
Bosch Bosch PS41 12V Li-Ion 1/4" Cordless Impact Drill Bare Tool Only
COMPACT: The Bosch PS41-2A 12V impact driver offers the shortest head-length of its class at 5.4 in, making it the ideal driver for tight corners and small working spaces LIGHTWEIGHT: At only 2.1 lbs the PS41-2A reduces user fatigue for longer periods of time and during overhead work POWER: Despite its small size, the PS41-2A driver delivers 930 in.-lbs. of max torque. The tool can also produce a no-load BPM of 0-3,100 and a max 2,600 RPM LONGEVITY: With a built-in fuel gauge the Bosch PS41-2A allows for easier battery management for continued work and longer use
$44.99 $38.99
-
Bosch BOSCH PS10-2A 12v 10.8v I-Driver Cordless Right Angle Adjustable Drill Driver
10.8-volt lithium-ion cordless screwdriver Articulating 5-position head through 90-degrees; good for tight spaces Durable plastic casing, comfortable cushioned grip Bosch Litheon is the most advanced Lithium Ion battery technology available today. Bosch exclusive engineering delivers 5 times more chargers than competitor Lithium Ion, 2 times longer run time than competitive Lithium Ion and optimal power in a compact lightweight design.
$99.99
-
RIDGID Ridgid R82005 12V Variable Speed 3/8" Compact Cordless Drill / Driver
LED LIGHTING: A timed LED light activates upon tool activation, letting you brighten up the job at hand so you can work in crevices or dark nooks AMBIDEXTROUS BELT CLIP: Slots on either side of this tool allow you to attach a belt clip. You’ll be able to keep this at your side regardless of handedness RUBBERIZED HEX GRIP allows for improved handling and accurate fastening, even in slippery conditions 18 POSITION CHUCK lets you switch from delicate to high-torque jobs in a pinch 2 SPEED GEARBOX works with the trigger to give you up to 1,500 revolutions per minute. This is ideal for most DIY or home repair fastening situations
$49.99 $38.99
-
Snap On Snap-on CTS561C 7.2V Cordless 1/4" Hex Screw Driver
The Snap-on CTS561 is a compact, 7.2-volt cordless screwdriver designed for professional automotive technicians to quickly fasten or remove bits in tight, restricted spaces (such as under-dash or trim work). It provides great mobility and controlled torque without relying on bulkier power tools
$169.99 $144.15
-
Snap On Snap On CTS561 1/4” impact Screwdriver 7.2V with Charger
Pistol grip-style handle for ease of use and extra comfort. Rocker style forward/reverse toggle switch. 55-minute battery charging time. Auto spindle lock for use in manual applications. Includes CTC572 charger and two CTB5172 batteries. 1/4-inch Quick change chuc
$159.99 $112.30
-
Dewalt DeWalt DW920 7.2V Cordless Adjustable Angle Cordless Screwdriver
The DeWALT 1/4-inch 7.2V Cordless 2-Position Screwdriver Kit is ideal for lower torque repetitive fastening applications. World-class ergonomics provide the lightest, most comfortable cordless screwdrivers available, resulting in greater productivity. This tool offers 80 inch lbs. of maximum torque output for a superior power-to-weight ratio in a variety of fastening applications as well as an adjustable two-position handle that allows for operation as both in-line and pistol-grip. The industrial quick-release hex-shank chuck allows for quick screwdriver bit changes and prevents bit ''run-out'', while the variable speed and reversing trigger switch provides 0-500 RPM for fastening and pre-drilling into wood, plastic, and light-gauge metal.
$44.99 $43.05
-
Bosch Bosch IDS181 18-volt 1/4-Inch Hex Compact Tough Impact Driver
Most Compact Impactor Design with a Head Length of 5.4 inches - Allows the tool to be used in small, tight and hard to reach places Provides the best runtime and control for small to medium duty fastening jobs, optimized torque limits stripping of screws and shearing off the head 3 LED Light Ring - Provides shadow free illumination for the best visibility in low lighting applications Designed to provide maximum impact endurance and increases tool's performance in small to medium duty fastening applications Electronic Cell Protection - Increases battery lifetime by preventing damage caused by misuse
$39.99
-
DEWALT Dewalt DCF885 20V 20-Volt MAX Cordless 1/4" 1/4 in. Li-Ion Impact Driver
DEWALT impact driver fits into tight areas with compact (5.55-inch front to back) design The cordless impact driver provides visibility without shadows with 3 LEDs with 20-second delay after trigger release DEWALT 20V 1/4 impact driver features one-handed loading 1/4-inch hex chuck accepts 1-inch bit tips Portability with included belt hook
$42.99 $36.99
-
Makita Makita XDT15 18 Volt Cordless 1/4" Battery Brushless Impact Driver Compact
Driver Delivers 1,240in-lbs of Maximum Torque Variable Speed Trigger Matches Power to Application On-board LED Light Provides Clear Visibility in Low Light Areas Battery is Compatible with Makita Charger Models DC18RA, DC18SD, DC18SC, DC18SE, DC18RC (NOT Included)
$58.99 $52.99
-
RIDGID Ridgid R82230 12V Volt Lithium Ion 1/4" Cordless Hex Impact Driver
Number of Items in Set: 1 Power Source: Battery Battery Technology: Lithium-Ion (Li-Ion) Battery Included: No Color: Orange Auxiliary Handle: No Chuck Size: 1 1/4 in Battery Capacity: 4 Ah Charging Time: 1 hr Number of Batteries: 1 Motor Type: Brushed Voltage: 12 V Features: Compact, Lightweight Speed: 2000 RPM Type: Impact Driver Model: R82230 Chuck Type: Keyless
$55.99 $52.99
-
Ryobi Ryobi P234G 18v Cordless Lithium Ion 1/4" Impact Driver Tool Only
Impact drivers are necessary components of the DIYer’s or homeowner’s arsenal. They combine the driving force of a hammer drill with motor-assisted torque action in the chuck when it senses resistance from screws, making the driving power of these tools unparalleled. Ryobi’s P234 impact driver, powered by 18 volt lithium ion batteries from Ryobi’s One+ line (though compatible with the older generations of NiCad batteries) is ideal for renovation projects in or around the house where driving long fasteners is necessary. With 1,500 pounds of torque behind this dual-action motor, the P234 has enough juice to do what you need. Get in any tight spaces with its sleek, light, compact design. Hold it comfortably with the notched, rubberized grip that helps to keep the elements at bay. Its magnetic base can keep your bits and screws close in case you need to make a quick change on the job, which can be done with the quick-release collar that ejects bits as you pull it back. Ryobi has created an impact driver of prime convenience and value. Add it to your collection of One+ tools today.
$29.99 $17.99
-
Bosch Bosch 23614 14.4V BlueCore Cordless Impactor Impact Driver
Innovative Hammer & Anvil System delivers up to 1,150 in/lb of torque — Produces twice the torque of the gear driven systems found in standard drill drivers Soft-grip handle, not the user, absorbs the impact during fastening applications — Reduces fatigue and stress, provides maximum cushioning and comfort Cutting-edge, high-performance motor and all-metal gears — Super fast operating speed, delivering a category-best 3,200 BPM and 2,800 RPM Lightweight 4.0 pounds and 6.5 inches in length — Incredibly versatile for use in dozens of drilling, fastening and driving applications Aluminum gear housing with protective rubber front Externally accessible brushes — For easy brush replacement 1/4" hex drive with Quick Release Variable-speed trigger — For complete control Multi-purpose reversible tool hook Multiple-position swivel LED lighting system — Increases visibility - great for dark or enclosed areas
$49.99 $29.99
-
DEWALT DEWALT DCF885 20-Volt MAX Lithium-Ion 1/4-Inch Impact Driver (Tool Only)
Up to 1400 in. lbs. max torque, 2800 RPM, & 3200 IPM One-handed loading 1/4 in. hex chuck accepts 1 in. bit tips Compact 5.55" front to back & lightweight 2.8 lbs. design
$32.39 - $35.99
-
Craftsman Craftsman 875.199830 1/2 Inch Drive Pneumatic Impact Wrench
1/2 inch drive Forward/reverse Comfort grip handle Impacts per minute ..................................................... 900 IPM Free speed (No Load) ........................................... 7,500 RPM Ultimate torque ....................................................... 400 ft. tbs. Weight ............................................................................. 5.1 Ibs. Average air consumption ............................................ 6.5 CFM Recommended hose size ........................................... 3/8" I.D. Airinlet.......................................................................... 1/4"NPT Maximum Air Pressure ..................................................90 PSI Overall length ....................................................................... 7_/8'' Drivesize............................................................................... 1/2"
$39.99
-
TC Services TC Services TC-1-NL Needle Scaler
Needle Scaler
$59.99
-
Porter Cable PORTER-CABLE PC1800ID 18-Volt 1/4-in Cordless Variable Speed Impact Driver
Heavy-duty design provides 2,800-BPM Variable-speed trigger (0-2,900-RPM) delivers 1,600-in-lbs torque without kickback 1/4-in hex drive Uses 18-volt lithium-ion battery (not included) Lightweight 2.6-lb design reduces user fatigue Integrated LED work light for visibility in dimly lit spaces
$39.99
-
Husky Husky H4340 Pneumatic 1/4 in. Air Impact Driver
The new Husky air tool line in built to industrial standards for the professional user providing more power, less noise and longer life. This new Husky 1/4 in. Impact Driver features a low weight composite housing and textured handle for comfort and built-in silencing to reduce tool noise. The side mounted Forward/Reverse makes directional changes smooth and easy and the tools 12,000 RPM free speed, 75 ft.-lbs. of torque and 1/4 in. quick change chuck make fast work of any job. Designed for driving long screws and lag bolts into all types of wood where high torque and fast run-down speed is required and for driving self-tapping screws into sheet metals .This unique air operated impact driver eliminates the down time of switching / re-charging cordless tool batteries and is less bulky and lighter in weight than cordless equivalents. Ideal for applications where compressed air is available and for high volume screw driving applications.
$49.99
-
Masterforce MasterForce FlexPower Heavy Duty Impact Wrench Driver 241-0407 20V 1/2 Inch
1/2 inch 18/20V High torque 0-1900 RPM
$119.99
-
Ingersoll Rand Ingersoll Rand 514 Heavy Duty 1 Inch Pneumatic Impact Wrench
1 inch drive, pneumatic
$229.99 $137.99
You have seen 24 out of 230 products