Shop pre-owned professional tools for every trade at ZeereeZ. Browse power tools, hand tools, diagnostic equipment, electrical testers, HVAC and refrigeration tools, plumbing and hydraulic equipment, measuring tools, welding gear, and workshop essentials from trusted brands.
Tools
-
Snap On Snap On Tools PS4809 Red Pneumatic 1000 RPM 8" Geared Adjustable Grip Sander
• Remove and level large amounts of filler materials such as glue or epoxy • To level small welds • Remove coatings prior to painting • For use on metal, solid surfaces, wood and fiberglass • Super ergonomic adjustable grip is indexable to multiple positions for optimum comfort • Soft grip housing material for maximum vibration absorption
$169.99 $153.10
-
Dewalt DeWalt DW920 7.2V Cordless Adjustable Angle Cordless Screwdriver
The DeWALT 1/4-inch 7.2V Cordless 2-Position Screwdriver Kit is ideal for lower torque repetitive fastening applications. World-class ergonomics provide the lightest, most comfortable cordless screwdrivers available, resulting in greater productivity. This tool offers 80 inch lbs. of maximum torque output for a superior power-to-weight ratio in a variety of fastening applications as well as an adjustable two-position handle that allows for operation as both in-line and pistol-grip. The industrial quick-release hex-shank chuck allows for quick screwdriver bit changes and prevents bit ''run-out'', while the variable speed and reversing trigger switch provides 0-500 RPM for fastening and pre-drilling into wood, plastic, and light-gauge metal.
$44.99 $43.05
-
Milwaukee Milwaukee 2607-20 M18 Li-Ion 18V 1/2" Cordless Compact Hammer Drill/Driver
The Milwaukee M18 FUEL 1/2 in. Hammer Drill is the industry's most powerful brushless battery powered drill, delivering up to 60% more power. Its cordless body is up to 1.5 in. shorter and up to 2 times faster under heavy load than other models. The all-metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance. The POWERSTATE Brushless Motor was purposely built for the M18 FUEL 1/2 in. Drill Driver to provide Up To 60% more power than the competitive set. Built-in REDLINK PLUS Intelligence ensures optimal tool performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system. The REDLITHIUM High Output HD12.0 Battery Pack delivers more work per charger and more work over the life of the pack than competitors. In addition to the drill, this kit comes with a side handle, belt clip and bit holder.
$53.05 $50.05
-
Moon ZMoon ZM201 Professional OBD2 Scanner Diagnostic Tool, Enhanced Check Engine
Full OBDII Modes Scanner for Car: As professional car scanner, ZM201 has all the OBD2 functions you need. Read & clear codes, turn off engine light or MIL, view freeze frame, read I/M readiness, retrieve vehicle VIN, battery voltage test, live data stream (with graphing display), built-in 35901 DTCs, O2 sensor test, onboard monitoring mode, and perform component testing etc. Enhanced OBD2 Scanner Diagnostic Tool: Live data and DTC replay combined with printing function, you can connect it to a computer for fault data printing, prevent auto repair shops from charging randomly, save money and time. ZM201 obd scanner also comes with free-lifetime software updates, ensuring you always have the latest features and improvements. 35,901 DTC Lookup: ZM201 car code reader built-in 35,901 DTCs, the old model obd2 usually only have 3,000-10,000. So the ZM201 car scanner has a huge advantage, which means that this obd2 scanner can better help diagnose and solve your vehicle faults. This is a great option if you want to replace or upgrade an existing car scanner. Compatible with 98% Vehicles: ZM201 OBD2 scanner for car is compatible with most cars after 1996(USA)/2002(EU)/2008(Asia). If your car has an OBD2 port (16Pin), and the production time meets the above timeline, then your vehicle is compatible. But it is not compatible with new energy vehicles, hybrid vehicles, and models that do not comply with the OBD2 protocol. Convenient Shortcut Functions: The addition of shortcut keys enhances the user experience. Pressing F1 enables you to quickly retrieve trouble codes, while F2 provides instant access to I/M readiness information. We've also introduced left and right navigation buttons (the previous model had only up and down buttons), making operation even more convenient. User-Friendly Design: The scanner boasts a 2.8-inch color screen that allows you to choose between dark and light modes and adjust the brightness according to your preference. Audible beep notifications (which can be disabled) accompany key presses, providing an intuitive user experience. The vehicle status indicator light turns red when a fault is detected, yellow when there's an incompatibility/connection failure, and green when the car is successfully connected.
$39.99 $38.05
-
INGERSOLL RAND Ingersoll Rand 2236QTIMAX DXS2 1/2" Air Impact Wrench
The Ingersoll Rand 2125QTiMAX Impact Wrench is a high-powered and durable tool designed for professional automotive and industrial applications. With a maximum torque of 332 ft-lbs, this impact wrench is capable of handling even the toughest jobs with ease. The 2125QTiMAX Impact Wrench features a twin-hammer mechanism that delivers consistent and smooth torque output. It also has a patented four-position power regulator that allows for precise control of the tool's torque output, making it an ideal tool for a range of applications. The wrench also has a one-handed forward/reverse control that allows for quick and easy switching of directions. Its ergonomic handle reduces fatigue and provides greater comfort and control during extended use. The 2125QTiMAX Impact Wrench is built to last with a rugged steel housing that can withstand the toughest working conditions. It also has a unique muffler that reduces noise levels during operation, making it a quieter tool than many of its competitors. In addition, this impact wrench is easy to maintain with a simple two-piece construction that allows for easy access to internal components. It also has a convenient air inlet swivel that prevents twisting of the air hose during use. Overall, the Ingersoll Rand 2125QTiMAX Impact Wrench is a high-powered and reliable tool that is built to handle even the toughest jobs with ease. Its twin-hammer mechanism, patented power regulator, and ergonomic design make it a must-have for professionals in a range of industries.
$159.99 $120.25
-
Milwaukee Milwaukee 2235-20 400 AMP Clamp Meter 600V AC/DC Heavy Duty True RMS
The Milwaukee Clamp Meter is a heavy duty True-RMS electrical current tester for professional residential, commercial and industrial applications. The perfect tool for the professional electrician, the 2237-20 Clamp Meter provides a wide 1.3 in. jaw opening to easily handle large conductors, a thin jaw profile for access to tight spaces and a high contrast white-on-black display for clearer readings. In addition, the Milwaukee Clamp Meter was designed with embedded non-contact voltage detection and an LED work light to increase end user productivity
$44.99 $43.05
-
Matco Matco Tools MD257 True RMS Auto-Ranging Backlit Tech Digital Multimeter
Wide Range of Readings: Provides readings for volts, amps, and ohms necessary for comprehensive electrical system tests. Safety Features: Includes a "Beep-Jack" audible warning that alerts users against improper A-terminal plug-ins, reducing the risk of damage. Ghost Voltage Buster: Features Lo-Z (low impedance) mode, which drains "ghost" or residual voltages, leaving only true, hard signals on meter readings. True RMS: The multimeter is a True RMS meter, which provides accurate readings of AC voltage and current, even with non-sinusoidal waveforms. Additional Tests: Capable of performing diode and continuity tests, as well as measuring temperature and capacitance. Usability: Features include auto-ranging (automatically selects the correct measurement range), a backlight for use in low-light conditions, and an automatic shut-off to save battery life
$69.99 $66.05
-
Rothenberger Rothenberger ROMAX TT US 1000002128 HVAC ProPress Crimping Press Tool
Plumbing and heating installers use the electro-hydraulic radial press maschine Romax Compact TT for conducting domestic and service installations, even in confined spaces. The Romax Compact TT uses turbo pressure for pressing metal fittings up to ø 35 mm in only 3 seconds. Enormous power on just 34 cm length thanks to its two cylinder construction. The perfectly distributed weight facilitates working in continuous use.
$1,199.99
-
STINGER STINGER 3/8" StaplePac Cap Staples A-11 Crown Staples 20ga
The Stinger CH38A Auto feed Cap Hammer delivers the holding power of a cap with the speed and ease of a hammer tacker. The Stinger CH38A features gravity feed mechanism allowing the tool to airlessly deliver a 1 in. plastic cap with a 3/8 in. staple without a trigger. The CH38A is for use securing roofing underlayment's, felt and house wrap. Highlights For use with Stinger 3/8 in. staplepac only Holds 168 caps and 168 staples An airless cap system that delivers a cap and a staple Advanced auto-feed feature automatically advances the cap and positions it for the staple Cap fasteners are recommended installation best practice by house wrap manufacturers as caps help seal out moisture that can penetrate sidewalls Provides better holding power than a nail or staple alone, reducing problems with moisture penetration and blow-offs Easy to use
$34.99 $33.05
-
RIDGID Ridgid 31028 RP 210 ProPress Compression Tool w/ 1-1/4" 1" 3/4" 1/2" Jawas
Say "hello" to your little friend! RIDGID® introduces the ultimate in press tool technology: the RP 210-B. For a fast and reliable way to join copper, stainless steel and PEX, the new RP 210-B has more capacity than any compact press tool on the market. This model is 2 inches shorter and 25% lighter than our previous compact tool and features the longest service interval available (32,000 cycles), an improved swiveling barrel and a powerful 18V Lithium-Ion battery. Now you can do more? with less! Choose the company that introduced America to press technology. Choose RIDGID. Features Capacity: 1/2" ? 1 1/4" (Copper & Stainless Steel), 3/8" - 11/2" (PEX) 270° Barrel/Jaw Swivel Battery: 18V Li-Ion 1.1Ah Weight: 6.4 lbs. with Battery Battery Charger: 115V Hydraulic Ram Output: 5,400 lbs. (24kN) Operating Temperature Range: 15°F to 122°F Approximate Cycle Time: 5 seconds Compatible with all RIDGID® Compact Series Pressing Attachments
$999.99 $900.10
-
Matco Matco DTR80F Digital Torque Ratchet Wrench 4-80 ft. Lbs
The Matco DTR80F offers a range of features designed for accuracy and ease of use in professional automotive and mechanical applications. Drive Size: 3/8" drive. Torque Range: Measures from 4 to 80 ft. lbs. (foot-pounds) or 10-108 N.m (Newton meters). Accuracy: Torque accuracy is specified as +/-4% CW (clockwise) and +/-4% CCW (counter-clockwise) of 20%-100% of the full scale. This accuracy can be maintained without calibration for up to 100,000 cycles. Alert Modes: Features a vibration alert when the preset torque value is reached, in addition to a big LCD screen for easy reading. Durability: Constructed from alloy steel, it has a sealed head mechanism to keep dirt and fluid out and is designed to be splash-proof. Usability: The device allows for a quick peak value catch during rapid actuation in 0.2 seconds and offers a simple 2-key setup. It can measure in both N.m and ft. lbs. units.
$59.99
-
KNS Instruments KNS Instruments CVC Portable Currant & Voltage Calibration Device
The Model CVC is a portable calibrator designed to meet the requirements of field-calibration, testing, and troubleshooting of transducers, transmitters, actuators, and other process and control devices. The Model CVC features a large, 0.59” (15 mm), LCD numerical display, with blue backlighting for use in dimly lit areas. Powered by a readily available standard 9V battery, it also comes with a 120 V AC plug-in power supply for bench-top use. 0.0 to 20.0 mA DC output in 1.0 mA steps 0.0 to 10.0 V DC output in 1.0 V steps Three output modes automatically selected by plug location Simulate using external loop supply (30 V DC Maximum) Source using internal 9V battery Voltage-output Auto-ramping with user-adjustable minimum & maximum output values User-adjustable ramp step time, 1 to 20 seconds, in 1 second increments User-adjustable auto-power-off time from 1 to 20 minutes in 1 minute increments 3-Position bail for pocket, hanging, or bench-top use
$59.99 $57.05
-
HILTI Hilti DX351 Powder Actuated Tool Fastener Nail Gun
Adjustable power regulation for optimal control of fastener settingsAutomatic piston return and cartridge advanceCan be used with X-MX 32 magazine or converted for use with single fastener guidePole tool available for overhead applicationsFastener Range: 1/2 in - 1-1/4 inPower Source: Hilti .27 caliber short in plastic strips of 10Piston Bore: 8 mmApprovals: Meets ANSI Standard A 10.3 and OSHA requirements for low velocity tools
$260.00 $247.05
-
Omer Omer SG44.32 18 Gauge 3/8" Crown Stapler for Senco M Staples
Staplers that provide a mid size motor with ample power for production of every woodworking category from Kitchen and Bath Cabinetry, to case goods, furniture, lattice panels, screening, heavy duty upholstery requirements, carrying staples up to 25mm leg length with medium crown width. Mobile Home and R.V. production, boats, snow mobile and personal water craft heavy seat materials. The list goes on and on for these staples ideal applications. Speed is important to this category of staplers, but consistent delivery of power is of equal need, as well as driving the staple to the same depth. This is what Omer's 220 motor staplers are famous for providing. Italian know how shines through, as you study the maneuverability, bump fire cyclic speed and utter reliability that's built into Omer staplers.
$129.99 $84.35
-
Snap On Snap On TPMS4 Tire Pressure Sensor Monitoring System TPMS Programming & Diagnostic Tool
• Relearns vehicle TPM systems by providing vehicle-specific reset procedures when a vehicle’s tires have been rotated • Features vehicle-specific prompts that guide the TPM system relearns following a sensor replacement • Works in conjunction with Snap-on® diagnostic platforms to relearn sensor IDs on Asian vehicles • Aftermarket programming software to easily replace TPM sensors with low battery life, one that is non-functioning or to install duplicates in summer/winter tires • Prints sensor information using TPMSconnect software (included) on a desktop or laptop computer • Includes replacement TPM sensor part number lookup for OEM and aftermarket sensors • Daylight-readable 2.8" high-resolution VGA display • Built-in lithium-ion rechargeable battery and charger included • Includes a TPMSconnect portal that installs on a PC or laptop, and administers software updates • After the first 12 months purchased, the TPMS4U update will allow software updates for a 12-month time period • Capable of programming aftermarket sensors
$420.00 $378.10
-
MAKITA Makita XGT 40V Max Tethered Battery Adapter for PDC1200A01 PDC01
The Makita 40-Volt maximum XGT Adapter connects 40-Volt maximum XGT tools to the PDC1200A01 or PDC01 Portable Backpack Power Supply (tools and power supplies sold separately). It connects quickly and easily, and allows for longer run times when used with XGT. It is made of high-quality materials for durable construction and long life.
$119.99
-
Jupiter Jupiter Power 63432 1500 Watt Continuous Power 3000 Watt Peak DC to AC Power Inverter
This power inverter lets you run small appliances and electronics during a camping trip, roadside stop, or power outage by using your vehicle's battery. This power inverter features a high-surge capacity for products that require power up to 3000 watts to start and an LED readout to monitor amps and voltage. High-surge capacity for products that require power up to 3000 watts to start Continuous power up to 1500 watts Protection from low/high voltage, high temperatures, high currents Modified sine wave prevents damage to sensitive electronics Two 120V AC outlets 2 USB ports - compatible with all smartphones and tablets Short circuit and overload protection LED indicator light
$69.99 $66.05
-
Inficon Inficon TEK-Mate Refrigerant Leak Detector 705-202
TEK-Mate is the ideal refrigerant leak detector for the light-to-medium duty user who demands reliable leak detection at a budget-friendly price. Features such as the patented INFICON heated diode sensor, variable intensity audible and visual alarms and automatic compensation for changing background refrigerant concentrations make TEK-Mate the best bargain in refrigerant leak detectors. See for yourself why TEK-Mate is the #1 selling refrigerant leak detector in the HVAC/R market. BENEFITS Detects R22, R134a, R404a, R410a, R448a, R507 (AZ-50), R32, HFO1234yf, and all other CFCs, HCFCs, HFCs, and HFOs Runs on 2 "D" cell batteries No need for adjustments since the automatic background compensation feature continuously monitors and compensates for changing background "noise."
$69.99 $66.05
-
Makita Makita PDC1200A01 1200WH XGT LXT 40V Equipment Battery Backpack System
The Makita® ConnectX™ lithium-ion portable power pack is built with battery cells to offer an optimum energy capacity of up to 1200 Wh. It is suitable for use with two 18 Volts LXT®, 40 Volts max XGT®, and 36 Volts direct power connection. Using this power pack, you can operate the DUB362 model for more than an hour at its highest speed. It can be used as a stationary power pack with the help of its easily detachable harness. It has reflectors for high visibility from a distance during darkness. It comes with a waist belt that can easily adjusted at the user's convenience. It is built with a main power switch with an auto-off function every 8 hours. The four green LED fuel gauges help the user know the battery status. It includes a stand that allows easy mounting on the necessary workbench without slipping. It is even compatible with wet guard and IPX4 models. A DC4001 charger model is mainly designed for use with this power pack.
$1,000.00
-
Robinair Kent Moore Robinair 10500 Automotive Air Conditioner GM Compressor Service Tool Set USA
The Robinair 10500 Automotive Air Conditioner GM Compressor Service Tools kit is a high-quality, belt-driven A/C compressor service tool designed for specific use in GM vehicles, including Chevy, Buick, Cadillac, and Pontiac models. It is designed to provide the necessary tools for mechanics and car enthusiasts to maintain and repair their GM vehicles' A/C systems, primarily focusing on clutch and seal removal/installation procedures. Clutch plate remover/installer tools: The kit includes various pullers and installers necessary for safely removing and reinstalling the A/C clutch on different GM compressor models. Specific compatibility: The tools are designed to work with a range of GM-Harrison A6, early R4, later model DA6, HR6, and V5 compressors. Durable construction: The tools are made from durable materials for reliable and efficient service.
$89.99 $72.20
-
EverTough EverTough 67178 Master Inner Tie Rod Tool Set Kit With Case
Covers Wide Vehicle Range: This tie rod end removal tool includes 12 SAE and metric crowfoot adapters to fit most cars, trucks, and SUVs, helping users tackle a wide range of steering systems with one versatile tool. No Rack Removal Required: Inner tire rod removal tool easily remove and install inner tie rods without disconnecting the rack and pinion, saving time and reducing the risk of damage during steering component replacement or repair. Durable, Precision Fit Adapters: Each crowfoot adapter is nickel-plated to resist wear and corrosion, ensuring a snug fit on tie rods and helping users apply consistent torque with confidence. Fits Tight Engine Bays: The 1/2" drive handle fits comfortably in confined spaces while delivering the strength needed for inner tie rod service on modern vehicles with limited clearance. Handles Large Tie Rods: The tierod end removal tool 2.125" handle diameter accommodates small passenger vehicles as well as heavy-duty tie rods found on full-size pickups and larger SUVs.
$69.99 $66.05
-
Ramset Ramset Dynadrill 342 Heavy Duty Impact Rotary Hammer Drill
The Ramset Dynadrill 342 is a robust, corded electric rotary hammer drill designed for heavy-duty drilling and chiseling in tough materials like concrete and masonry. It is known for its durability and powerful performance in construction and industrial applications. Functionality: It operates as both a rotary hammer drill and a chisel, making it a versatile tool for various demolition and fastening tasks. Power Source: The tool is a corded electric model, typically operating at 115V or 240V, depending on the region and specific variant. Durability: Reviewers note the drill is "indestructible" and built for demanding environments, though it may be "too much drill" for lighter tasks like drilling into common brick. Accessories: It commonly comes with a hard orange metal carry case, assorted drill bits, and chisels. Performance: The drill combines rotary action with a hammering mechanism to efficiently bore holes for anchors and fasteners. Safety: The manufacturer emphasizes the use of personal protective equipment (PPE), such as ear and eye protection, due to noise and vibration levels.
$149.99 $90.40
-
UEI UEi DAFM3 CFM Anemometer Airflow Meter HVAC Tool w/ Case & Vane Sensor
The UEi DAFM3B is a digital anemometer/psychrometer designed with 6 HVAC/R must have parameters in one instrument. The DAFM3B measures humidity, air temperature, dew point and calculates wet bulb, air velocity, and air volume. The sensor is built into the remote fan and is specially protected by a twist cap. While in operation, open the cap for accurate temperature and humidity readings.
$79.99 $76.05
-
SPX Radio Detection SPX TX5 Utility/Pipe Locator Transmitter
The Tx family of signal transmitters has been designed to perfectly complement Radiodetection’s advanced high-precision cable and pipe locators including the RD8200, RD7200, and Marker Locator ranges.The Tx range is designed to meet the demands of tracing utilities through today’s complex underground infrastructure. The Tx-5 has a medium power and induction capability as well as Fault-Find. The transmitter range features locate frequencies compatible with locators across the Radiodetection Precision Locator ranges, and can be easily customized to match your chosen locator using the ‘model’ feature. All transmitters feature constant current across their entire bandwidth in all modes (direct connect, clamp or inductive mode), and deliver convenience on-site with an IP65 ingress protection rating, removable accessory tray and a large, high-contrast, backlit LCD screen. iLOC remote control iLOC is an advanced Bluetooth® link between the RD8200 locator and transmitter, which allows you to control the locate signal’s power and frequency from up to 1400’ / 450m away. Less time walking and more time locating. 90V maximum output High voltage output makes sure that you can get locatable signal onto even high impedance lines like telephone pairs. Fault Find Apply a Fault-Find signal with the Tx-5 and Tx-10 transmitter and use an accessory A-frame to detect and pinpoint insulation faults. SideStepAuto The transmitter can be used to recommend a general-purpose locate frequency for the intended locate task by measuring the impedance of the target cable or pipe. SideStepAuto helps to improve locate accuracy and extends battery life. Automatic impedance matching Transmit your locate signal as far as possible by automatically matching the transmitter impedance to that of your target cable. Lithium Ion battery pack option Deliver extended run-time, lighter weight and superior cold-weather performance by comparison to standard alkaline batteries. No need for operators to replace, manage and recycle alkaline battery cells, reducing the associated costs, workload and environmental burden. Built for on-site use – IP65 Shock resistant, ingress protected casing protects against knocks, drops, water and dust. ECO mode Extend alkaline battery life by enabling ECO mode. When a low battery condition is detected the transmitter gradually reduces the power output and provides audio and visual warnings. Multimeter function Measure output voltage, line voltage, current, impedance and power, and characterize faults on the target line before beginning a survey
$899.99 $675.25
You have seen 384 out of 1669 products
