Shop pre-owned professional tools for every trade at ZeereeZ. Browse power tools, hand tools, diagnostic equipment, electrical testers, HVAC and refrigeration tools, plumbing and hydraulic equipment, measuring tools, welding gear, and workshop essentials from trusted brands.
Tools
-
Noyes Noyes OFI-200 Handheld Optical Fiber Identifier Noyes Fiber Systems
NOYES Optical Fiber Identifiers are rugged, hand-held, and easy-to-use fiber optic test instruments designed to detect optical signals transmitted through a single-mode fiber without disrupting traffic. During installation, maintenance, rerouting or restoration, it is often necessary to isolate a specific fiber. By simply clamping an Optical Fiber Identifier onto a gently-bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and identify signal direction. The OFI-200 model is equipped with a unique two-position head design that can be configured to work with 250 µm, 900 µm, ribbon or jacketed fiber in seconds, without tools or adjustments. When testing coated fibers, the slim design of the OFI-200 allows easier access on a splice tray where the amount of work space is limited. The clamping trigger is ergonomically designed to fit the natural motion of the operator’s hand. A high-impact molded plastic case makes the OFI-200 suitable for use outside plant or in the central office. The OFI-200 is battery operated with a battery indication feature and performs thousands of tests before battery replacement is necessary. Features • Rugged, hand-held, lightweight • • Accepts 250 µm, 900 µm coated fiber, 3 mm jacketed fiber cable and ribbon fiber • • No head swapping or adjustments • • Identifies light carrying fiber and indicates direction of traffic • • Low insertion loss, traffic remains uninterrupted • • Indicates Tone signal visually and audibly • • 2 kHz Tone detection • • Low battery indication •
$349.99 $332.05
-
Innova Innova 3340a Professional Automotive DMM Digital Multimeter
Auto-Ranging, Auto Shut-Off & Over-Load ProtectionEasy and safe operation for users of all skill levels.10 MegOhm Input ImpedanceSafe for electrical and automotive use. Prevents damage to the vehicle’s ECU.High Amp RatingMeasure up to 15 amps for device testing.Measures Vehicle RPMUsing the included inductive pickup (including coil-on-plug vehicles).Automotive Specific Measurements RPM Dwell Frequency Temperature Pulse Width Duty Cycle Min/Max and Hold ButtonsEasily find and save retrieved data.Protective Rubber Corner GuardsDrop protection for any work environment.
$99.99 $95.05
-
Matco Tools Matco Tools MD9300 Digital Battery Tester Plus w/ Leads & Case USA
Designed to test most 12V lead-acid start batteries with a range of 125-1,400 CCA. It supports multiple international measurement units, including CCA, IEC, DIN, BCI, and EN, and displays results on a four-digit LED screen showing battery status, available CCAs, and voltage. The tester includes features such as temperature and low range compensation, detection of loose leads and bad cells, as well as a surface charge warning. Detachable cable leads allow for easy replacement, and it also analyzes starting and charging system voltages.
$129.99 $123.05
-
Matco Tools Matco Tools FIT550 Master Fuel Injection Pressure Tester Kit Case Diagnostic
The Matco Tools FIT550 is a comprehensive Master Fuel Pressure Tester Kit designed for gasoline engine diagnostics. It features a 0-100 PSI (0-700 kPa) dual-scale gauge with a relief valve, hoses, and numerous adapters for modern, import, and older vehicles. The kit is designed to test fuel injection systems, including TBI and port injection, and comes in a heavy-duty blow-molded case.
$199.99 $190.05
-
Black & Decker Black & Decker BDL110S Bulls Eye Auto-Leveling Laser with Sensor
The Black & Decker BDL110S BullsEye Laser Level and Stud Sensor is an essential tool for both professionals and DIY enthusiasts. This innovative device combines a laser level with a stud sensor, allowing you to achieve precise measurements and locate studs behind walls with ease. Whether you are hanging pictures, installing shelves, or performing any home improvement tasks, this tool ensures accuracy and efficiency.Key Features:- Auto-Leveling Laser: Automatically adjusts to provide a level line for accurate measurements.- Stud Sensor: Detects wood and metal studs up to 3 inches deep, ensuring secure mounting.- Easy-to-Read Display: Clear indicators show when studs are detected and when the laser is level.- Compact Design: Lightweight and portable, making it easy to carry and store.- Versatile Use: Ideal for various applications including hanging artwork, installing cabinets, and more.
$22.99 $22.90
-
Craftsman Craftsman 4-in-1 Level Laser Trac Level Model 948251
The Craftsman 4-in-1 Laser Trac (Model 948251) is a compact, versatile leveling tool typically used for home improvement tasks like hanging shelves, cabinets, or aligning pictures.
$22.99
-
Pneu Tools Pneu Tools Rap A Cap 150 Air Cap Nailer Pneumatic Nail Gun
The PneuTools Rap-A-Nail 150 air-powered metal connector nailer, item# RN150, drives 1-1/2" paper tape hanger nails in both .131 and .148 shank sizes. Includes one-year manufacturer's warranty. Comes complete with heavy-duty belt hook and plastic carrying case. The RN150 is extremely lightweight, fast, and inexpensive. A compact and lightweight design reduces fatigue and easily fits between 16" on center joists. The PneuTools Rap-A-Nail 150 offers a collated setup to effectively increase productivity in all construction applications using metal framing hardware, including joist hangers, straps, ties, post caps and more.
$99.99 $95.05
-
Snap On Snap-on MODIS EEMS300 Automotive Diagnostic Scanner Tool System
The Snap-on MODIS EEMS300 is a comprehensive, standalone automotive diagnostic tool combining a 4-channel oscilloscope and a scanner for OBD-I and OBD-II vehicles. Known for reliability, it features a color display, graphing functionality for live data, and component testing, often used for in-depth diagnostics on domestic and import vehicles. Integrated Diagnostics: Combines a scanner and a 4-channel, high-speed oscilloscope in one unit. Vehicle Compatibility: Covers a wide range of OBD-I and OBD-II domestic, Asian, and European vehicles. Data Analysis: Graphs live data and provides functional tests, allowing for deep, component-level analysis. Operation: Features a color screen and intuitive menus, often used as a, "stand-alone" tool that does not require internet connectivity. Portability: Typically supplied in a hard carrying case with various adapters and keys for different vehicle manufacturers.
$299.99 $285.05
-
Pipehorn Pipehorn Model 450 Ferromagnetic In Ground Utility Locator MagHorn
The Maghorn is an ideal tool for locating and pinpointing buried ferrous objects such as iron manhole covers, iron drop inlets, ductile iron pipe, rebar, magnetic surveyors nails, and property corners. The Pipehorn "MagHorn" Magnetic Locator is designed for easy use even in difficult areas where shrubs, underbrush and weeds are in the way. Outperforming regular metal detectors, the MagHorn detects deeper and is more accurate, isolating only the steel & iron targets. No confusion from aluminum cans, debris, and other non-ferrous metals. Working depth down to 18 feet deep depending on the size or mass of the object being located. Features Single-Handed Operation Breakthrough Sensitivity with patented Planar Flux Sensors Built for rugged use Simple to Learn, Quick, and Easy to Use Specifications Output: Audio, built in piezo speaker Battery: Two 9-volt alkaline batteries Battery Life: 40 hours (continuous usage) Weight: 3.4 lbs (1.5 kg) Waterproof Length: 12" Construction: Cast Aluminum housing with Fiberglass extension wand
$499.99 $475.05
-
Rotunda FORD Rotunda T74P-3504-A Rack & Pinion Power Steering Service Kit
The Ford Rotunda T74P-3504-A is a specialized dealer service tool kit designed for servicing TRW rack and pinion power steering systems, primarily introduced around 1974. It is a multi-piece kit often manufactured by OTC, used to rebuild or repair power steering racks, commonly associated with the 1974-1978 Ford Mustang II and related models. Purpose: The kit is designed for dismantling and rebuilding TRW rack and pinion power steering gears. Contents: The kit contains various tools, including specialty wrenches, holding tools (such as the T74P-3504-S spanner), and sizing tools (such as the T74P-3504-H). Application: It is commonly referred to as a Ford Dealer tool, designed for early rack and pinion systems.
$149.99 $142.05
-
Reed Reed Mtg H-12 4 Wheel Hinged Pipe Cutter 8” To 12”
Hinged Pipe Cutters feature four wheels to cut steel, stainless steel, cast and ductile iron with only 90° to 110° handle swing. Only 4” (125 mm) clearance is required around pipe. Strong guide fingers ensure perfect wheel alignment for square cuts. A closed 360° frame on the hinged pipe cutter forces all energy into cutting the pipe for maximum efficiency. There is no shower of sparks in this cold cut. REED has the only 4-wheel pipe cutter that tracks every time and the only one recommended for ductile iron, steel, and stainless steel to Schedule 100. This tool is a REED invention. Pipe Cutter with hinge is a REED invention that needs only 4” (102 mm) of clearance around pipe. Efficient handle swing of only 90° to 110°. Opens with hinge to place cutter around the pipe. Can be used anywhere - in the ditch, underwater, overhead, in racks of pipe! Ships with cutter wheels installed for cutting steel and stainless steel pipe. Pipe Capacity (in-nom): 8 - 12 Cutter Wheel: HI6 Application: Cast Iron, Ductile Iron Length: 34" Weight: 34.9 lbs
$599.99 $570.05
-
Fieldpiece Fieldpiece ACH 300A AC Clamp Multimeter HVAC Electrical Accessory Head
The current clamp is a small size accessory head for quickly reading up to 300 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on the meter. The ACH4 works with the Fieldpiece “Stick” meter, EHDL1 Electronic Handle, EH4W Wireless Handle, DL3 Data Logger, the HG2 and HG3 HVAC Guide® System Analyzers, or any other digital multimeter (with mVAC range) connected by Fieldpiece ADLS2 detachable silicone leads or AHDL1 handle adapter.
$19.99
-
Neutrik 5ft Heavy Duty PowerCon 20 Amp Twist and Lock Professional Equipment Power Cable
Heavy-duty professional power cable engineered for demanding stage, studio, and live event applications. Features a PowerCon twist-and-lock connector system that ensures secure, reliable connections under high-load conditions. Rated for 20 amps, this 5-foot cable delivers consistent power to lighting rigs, amplifiers, and professional audio equipment without voltage drop or connection failure. Built with durable outer jacket and reinforced connectors to withstand repeated use, transport, and installation stress. The twist-and-lock design prevents accidental disconnection during performances or critical operations. Ideal for touring professionals, rental houses, and permanent installations requiring dependable power distribution. Meets industry standards for professional-grade equipment. Essential for any serious production setup where power reliability directly impacts performance.
$19.99 $19.05
-
Milwaukee Milwaukee 2811-20 M18 FUEL SUPER HAWG Right Angle Drill w/QUIK-LOK (Bare Tool)
The Milwaukee M18 FUEL SUPER HAWG Right Angle Drill with QUIK-LOK delivers the next generation of ground-breaking performance with the power and speed to replace corded right angle drills. The cordless right angle drill is designed from the ground up to generate corded power, work as fast as the corded competition and provide users with up to 100 2-9/16 in. holes through 6 in. beams per battery charge on an M18 REDLITHIUM HIGH OUTPUT 6.0Ah battery (not included). The Milwaukee SUPER HAWG features the POWERSTATE Brushless Motor, optimized REDLINK PLUS electronics and is powered by REDLITHIUM HIGH OUTPUT Batteries. The drill's all-metal QUIK-LOK chuck provides you with ultimate durability and long tool life. The QUIK-LOK chuck also allows you to easily insert and remove attachments with 1 hand. An all-metal side handle and LED light ensures users have optimal control and visibility while operating their tool. The M18 FUEL SUPER HAWG delivers the performance and run-time to complete single-family home rough-in or the ability to rough-in multiple multi-family units on a single charge. Highlights Mechanical clutch in low speed QUIK-LOK chuck POWERSTATE brushless motor provides constant power under heavy load to power through 6-1/4 in. holes REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge All metal side handle for optimal control LED light to illuminate the work area Compatible with all M18 batteries
$209.99 $199.05
-
Mac Mac Tools Et3707 Digital Engine Analyzer 10 Megohms with Leads
The Mac Tools ET3707 is a digital engine analyzer designed for troubleshooting and maintaining passenger vehicle engines. It features a backlit digital display, 10-megohm input impedance for accurate readings, used for measuring ignition systems and RPM.
$59.99 $57.05
-
OTC OTC 3417 HD Mixed Fleet Vehicle Diagnostic Scan Tool
For Heavy-Duty shops that need a second tool in the shop and for their mobile repair trucks. Aftermarket general repair shops that need a cost effective solution for Heavy Duty Standard coverage and do not own a Genisys or other family tool. Features: •Brilliant Color Display •Shop rugged enclosure featuring protective rubber over high impact ABS plastic •Class 4 – Class 8 truck coverage featuring “Automatic Protocol Search”. •HD J1587 / J1708 and J1939 CAN, Engine, Transmission/ABS coverage and more! •Gasoline and diesel engine coverage. •Read and clear diagnostic trouble codes. •Live vehicle data such as: Engine speed Engine ECU temperature Percent acceleration pedal position Engine intercooler temperature Engine coolant temperature Battery volts Alternator volts Ambient air temperature Air inlet temperature •Global OBD II – All 9 Modes. •Fast Global OBD II Quick Test •Supports multiple Global OBD II trouble code requests •On-screen text and CD-based Manuals in Spanish, French, and English. •Vehicle data communication and power LED indicators. •Demo mode permits operation without vehicle connection. • On-screen definitions of diagnostic trouble codes. •Trilingual Quick Start Guide included to help technicians get started fixing cars FAST. •Customize data views in line graph, LED, or digital format with the push of a button. •Automatic recording of data. •Three record modes – marker frame, freeze data history, and code triggered record. • Four software-defined HOT keys. •Set measurement units in SAE English/Metric. • Internet upgradable.
$499.99 $475.05
-
Ashcroft Ashcroft Duragauge Plus Q-586 9445-08 1008 9 Gauge 0-15 PSI & 0-30 PSISet w/ Case
Q-586 - 0-15PSI 1/2 NPT 9445-08 0-30 PSI 1/2 NPT 1008 0-30 PSI 1/2 NPT
$159.99 $152.05
-
Fieldpiece Fieldpiece SDP2 Dual In-Duct Digital Psychrometer HVAC Service w/ Probes
The SDP2 Dual In-Duct Psychrometer is more than just your everyday HVACR psychrometer. It gives HVACR professionals more insight into HVAC evaporator performance than any other psychrometer, because it takes four evaporator measurements at one time: supply wet bulb, supply dry bulb, return wet bulb, and return dry bulb. So HVACR professionals get a live, real-time snap shot of the evaporator performance, even while conditions are changing. Based on these live, dynamic readings, the SDP2 Dual In-Duct Psychrometer registers system changes as they happen, and automatically calculates actual Delta-T, Target Delta-T, actual Evaporator Exit Temperature, and Target Evaporator Exit Temperature. Plus enthalpy (BTU/LBM) and Dew Point can be displayed in real-time. Sends live indoor wet bulb readings to the SMAN4 Digital Manifold while charging at the condenser Real-time Target Evaporator Exit Temperature and Target Delta T Displays actual indoor unit performance, AND calculates how indoor unit should be performing Shows enthalpy change across the evaporator -- in real-time Wirelessly sends all 4 evaporator temperatures to the HG3 System Analyzer for full system diagnostics Probe at return can be place up 10 feet away from probe at the supply
$149.99 $142.05
-
MILWAUKEE Milwaukee 2719-20 M18 FUEL Li-Ion Brushless Cordless HACKZALL Reciprocating Saw
The Milwaukee 2719-20 M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed design reciprocating saw. Utilizing a POWERSTATE Brushless Motor and a best in class 7/8 in. stroke length, the M18 FUEL HACKZALL cuts up to 50% faster than competitors. The compact, 1-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides the lowest in-cut vibration of any reciprocating saw, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS Intelligence ensures optimized performance and protects your investment from overload, overheating and over-discharge. A rubber seal and weep holes provide superior protection against water and debris. Highlights POWERSTATE brushless motor: increased cutting speed and power through the toughest applications REDLINK plus intelligence: the most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger REDLITHIUM Battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market 1-handed design provides superior control and versatility over standard reciprocating saws Compact and lightweight design allows for easier cutting in tight spaces or overhead applications 7/8 in. stroke length removes more material with each stroke resulting in the faster cuts Pivoting shoe provides constant contact with the work-piece resulting in smoother cuts with less bucking and vibration
$109.99 $104.05
-
Spotnails SpotNails WS4840W2 4800 18-Gauge 1/4" Pneumatic Crown Stapler Nailer
Spotnails WS4840 Industrial Grade Stapler narrow crown. Uses 18 Gauge 1/4-inch crown 4800 staples. Staple leg length from 1/2-inch (12mm) to 1-5/8-inch (40mm). PG - High Tensile staples; PN - nylon coated staples. Applications: Furniture Assembly Floor Underlayment Door and Window Trim Corner Block Cabinet and Drawer Assembly Stapler Specifications Drives: 18 Gauge 1/4" Narrow Crown Staples Staple Lengths: from 1/2" to 1-5/8" (12mm to 40mm) Magazine Capacity: 168 Staples Uses: SPOTNAILS 4800, DUO FAST 1800, SENCO L, ATRO 90, BeA 90, PREBENA EB, HITACHI N3804, HAUBOLD KL 6000 Air Pressure: 80-100 p.s.i. Operating Modes: Bump Fire Trigger Features Restrictive Trigger Bump Fire Trigger Included 360 Degree Adjustable Exhaust Adjustable Depth Control Quick Clear Nose, Rubber Grip, Plastic Carrying Case & Safety Glasses Included!
$79.99 $76.05
-
Duoyi Duoyi DY522A Black Vacuum Pressure Tester Refrigeration Digital Manifold Gauge
【Digital Manifold Gauge Set For 92 Refrigerants】Compared with other refrigerants meter,our digital manifold gauge can be filled with 92 types of refrigerants and has a wide range of applications.Meter have multiple functions such as dual pressure/temperature test,condensation evaporation pressure/temperature test,pressure leak test,vacuum degree test,calculation of supercooling/superheating.It is suitable for refrigeration equipment such as air conditioners, cold storages and refrigerators. 【Dual Pressure&Temp Test Of High/Low Pressure Pipelines】HVAC gauges can measure the pressure/temperature of the refrigerant in the high/low pressure pipelines of the air conditioner in real time.During the refrigerant pressure test,the meter can display the corresponding evaporation/condensation temperature.The smaller the deviation between the temperature measured by the temperature sensor and the evaporative condensation temp., the better the cooling effect and the quality of the refrigerant. 【Condensing/Evaporating Pressure And Temp Test&Supercooling/Superheating Test】During the refrigerant pressure test,it can automatically test the refrigerant condensation/evaporation pressure temp.The lower the condensation/evaporation pressure and temp, the better the cooling effect.The degree of supercooling/superheating is automatically read.The greater the degree of superheating,the less refrigerant is filling,the lower the degree of subcooling can improve the cooling capacity of the system. 【Vacuum Measurement & Pressure Leakge Test&High/Low Pressure Temp Test】Refrigerant meter vacuum table of the digital gauges hvac can be switched to each other.Vacuum test can test the percentage of vacuum measurement and vacuum pressure,can judge the air tightness of the pipeline.Calculate the pressure difference between the initial test pressure and the second test pressure, and observe whether there is any leakage in the refrigeration system pipeline,and can record the leakage time speed. 【V-Shaped Valve Switch&High-Precision Data】High/low pressure valve of the digital refrigerant gauges adopts a V-shaped design.Compared with the ordinary knob valve,the V-shaped valve is easier to control the amount of refrigerant filling,saving operation time,and Material is more durable.Built-in 32-bit digital processing unit and high-precision data acquisition unit,the data volume is high and stable.Pressure/temperature multi-unit automatic conversion (kPa,Mpa,bar,inHg,PSI,Celsius,Fahrenheit) 【3.5" Backlit Display & Visual Refrigerant Filling Window & High Strength Material】HVAC digital manifold gauge set adopts 3.5-inch backlight display design,the data is easy to read,and each test result is divided by lines on the screen,the data is more intuitive.HVAC digital gauges is made of high-strength engineering plastic,with anti-slip design on both sides,which is comfortable to hold and durable.Meter has a visualization window through which you can keep an eye on the refrigerant filling.
$99.99 $95.05
-
Yokogawa Yokogawa Top Gun H10X Pro Gas Leak Detector
For many years, air conditioning technicians have sought a leak detector For many years, air conditioning technicians have sought a leak detector that would combine the sensitivity, long sensor life, and ruggedness of Yokogawa's H10P Series into a low cost, lightweight package. Now it is here. Yokogawa proudly announces the addition of the Yokogawa Model H10XPro Refrigerant Leak Detector to its renowned family of refrigerant detection products. Selectivity: H10XPro Refrigerant Leak Detector utilizes a patented new heated diode type, which senses only halogens. Other gases (such as smoke, moisture, CO and CO2) do not affect the sensor.Sensitivity: H10XPro Refrigerant Leak Detector retains the 0.1-ounce per year sensitivity for all CFC, HCFC, and HFC refrigerants. Even such difficult gases as HP62 (R404s) are easily detected.
$44.99 $43.05
-
MAKITA Makita DF330D 10.8V Cordless Driver Drill with Battery and Charger
2-Speed driver drill with 10 mm (3/8″) keyless chuck; lightweight Delivers 22 N·m (200 in.lbs.) of Max Torque in an ultra compact design Variable 2-speed design (0-350 & 0-1,300 RPM) covers a wide range of drilling and driving applications Ultra compact design at only 189 mm (7-7/16″) long and lightweight for reduced operator fatigue Built-in LED light illuminates the work area
$109.99 $104.05
-
Just Better JB Just Better DV-40 Supernova Digital Micron Evacuation HVAC Gauge
Tests to make sure system is properly evacuated of air and moisture before charging with refrigerant Brass fitting on lengthy flexiblecord to hard to reach places Programmable alarm and shut-off Backlit large LCD screen
$89.99 $85.05
You have seen 192 out of 1669 products
