Home Stereo Equalizers | Processors

The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang electrical box. There are eight channels and a master, each with a level control and an on/off button. Used with the VCM-88C, the RD or RW-8C offers a direct correlation of remote faders to VCM-88C channels, as well as its master fader. Used with the Protea 24.24M DSP Matrix Processor, and using Protea System Software version 6.4 or higher, each RD/RW- 8C slide fader can be assigned to attenuate any 24.24M input, output, or input/output combination, limited only by the number of available 24.24M channels.

Read more less

Input Sensitivity: 1V Output Level: 1V (6V max) Gain: ± 0dB Frequency response: 5Hz to 100kHz Signal to Noise Ratio: 110dB Total harmonic distortion: 0.007% Control Range: ± 12dB Frequency Bands: 63, 160, 400, 1K, 2.5K, 6.3K, 16KHz Dimensions: 430 x 80.4 x 192.5mm Weight: 1.8kg Year: 1997

Read more less

GENERAL DESCRIPTION The Peavey ten-band Stereo Graphic Equalizer consists of two independent graphic equalizer sections, each with continuously variable 12 dB per octave high and low cut filters. The equalizer circuitry provides 15 dB of boost or cut at ten center frequencies which are as follows: 30 Hz, 60 Hz, 120 Hz, 250 Hz, 500 Hz. 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz. The low cut filter is adjustable from 20 Hz to 500 Hz, and the high cut filter is adjustable from 5 kHz to 30 kHz. These active filters have been optimized for minimum peaking and wide dynamic range operation. The equalizer is impedance and level compatible with most commercial sound reinforcement, industrial, and consumer type equipment. The inputs include both low impedance XLR and high impedance ½" phone type connectors. All outputs have a source impedance of less than 600 Ohms with both balanced XLR and unbalanced 14" connections provided for ease of installation. Protection is provided at all inputs and outputs for accidental overvoltage and short circuit conditions. The power supply is extremely rugged using "state-of-the-art" voltage regulators which will provide a stable voltage source even under extreme power line variations. The graphic equalizer's circuitry is designed for use under a wide range of input signal levels. The combination gain/attenuator level control provides 15 dB of boost or cut. This control allows level matching in almost any type of operating environment. A bypass switch allows the graphic and filter system to be removed from the circuit without disturbing the built-in level match system. The unit can be used as a high quality line amplifier providing more than +20 dBM into 600 Ohms at the balanced output. INSTALLATION AND ADJUSTMENT The Stereo Graphic Equalizer is designed to be mounted in a standard 19" rack. The unit must be secured by the use of four mounting screws for optimum mechanical stability. The equalizer does not generate any appreciable heat and is not adversely affected by externally generated fields from power transformers due to the unit being completely enclosed in a metal enclosure. For maximum reliability and useful service life, the unit should not be mounted directly over large tube type power amplifiers or other high operating temperature equipment. The heat developed by this type of equipment could degrade performance and shorten component lifetime.

Read more less

Manufacturer: Kenwood Model: GE-4030 Type: Equalizer Years of manufacture: 1993 - 1996 Made in: Japan Color: Black Original price approx.: 548 DM

Read more less

For use with 901 Series V direct reflecting speakers.

Read more less

The 901 Series VI Active Equalizer Version 2 from Bose is a compact active equalizer designed for use with the 901 Series VI Direct/Reflecting speaker system. The equalizer balances the output of all speaker frequencies to provide natural tonal balance and clarity for an exceptional music experience.

Read more less

Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue FM Tuning Range: 88 to 108 MHz MW Tuning Range: 535 to 1605 kHz Sensitivity: 2.5uV (FM), 20uV (MW) Signal to Noise Ratio: 60dB (FM) Distortion: 0.8% (FM) Selectivity: 45dB (FM), 20dB (MW) Output: 1500mV Dimensions: 292 x 111 x 267mm Weight: 3.9kg Year: 1968

Read more less

The Califone VoiceSaver™ 285 Personal PA System features a 5 watt amplifier / speaker, and is an ideal solution for instruction, tour applications, coaching, and much more. The 5 watt amplifier and auxiliary input connection can be used to amplify audio from video projectors & computers to enhance presentations. The VoiceSaver™ 285 is easy to use and includes a head-worn microphone.

Read more less

Compu Effectron Delay Feedback Flange Chorus Processor

Read more less