Professional plumbing tools for pipe work, fitting, and drainage. Shop pipe cutters, PEX expanding tools, compression fitting tools, pipe threaders, pipe welders, and drain equipment from Ridgid, Reed, Milwaukee, and other trusted brands used by plumbers and pipefitters.
Plumbing Tools
-
RIDGID Ridgid Propress CT-400 Copper Crimper Crimp Tool
The CT400 Press Tool, when used with appropriate jaw sets, is designed to mechanically press fittings onto tubing to create a water-tight and permanent seal. When the switch on the CT400 is depressed, an internal electric motor powers a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force onto specially designed press fittings. The entire cycle duration is approximately four (4) seconds. Once the cycle begins to deform a fitting, it will automatically continue until completion. A hydraulic release button is provided to allow the removal of the jaw set or press ring from the tubing in the event of a power or system failure during pressing.
$449.99 $292.35
-
MILWAUKEE Milwaukee 2474-20 M12 12V Lithium-Ion Cordless ProPEX Expansion Tool Kit 1/2" 3/4" 1"
The Milwaukee M12 PEX Expansion Tool features a built-in auto-rotating head delivering users with convenient one-handed operation. The expansion tool features a compact right angle design enabling users to quickly and easily install tubing in tight locations. A quick cam mechanism delivers precise, continuous expansion for 3/8 in. to 1 in. PEX connections while a paddle trigger allows users to easily reach confined spaces. All-metal gears and an integrated metal frame deliver maximum tool durability on the job site. The Milwaukee expansion tool is specifically for PEX and is built to provide users with faster, effortless installations. The cordless expansion tool is compatible with all Milwaukee M12 batteries and features a built-in fuel gauge that displays remaining run-time. In addition to the expansion tool, this kit includes 1/2 in., 3/4 in. and 1 in. PEX expansion heads, one PEX expansion cone grease, two M12 REDLITHIUM CP1.5 battery packs, an M12 Lithium-ion Battery Charger and a carrying case. Highlights Quick cam mechanism for fast, continuous expansion Compact, right angle design for use in tight locations Capacity: 3/8 in. to 1 in. expansion PEX connections Compatible with all M12 batteries LED work light illuminates workspace in dark locations Paddle trigger for easy reach in confined spaces All- metal gears and integrated metal frame for jobsite durability Run Time: 130 1/2" connections per charge
$329.99
-
RIDGID Rigid 65-R C-418 Manual Pipe Threader W/Handle Threads 1" to 2" Pipe
Threads 1"-2" pipe. Jam-proof drive pawl. Cam workholder sets instantly. Right-hand only.
$159.99 $96.40
-
RIDGID Ridgid ProPress 1-1/4 Inch Copper Crimping Die Jaw
Ridgid Pro Press 1-1/4
$159.99
-
Elliott Elliott Roto-Jet 0600R Rotray Boiler Tube / Pipe Cleaning System
Elliott Tool Roto-Jet I Cleaning System for tube and pipes with a 1 HP, 110V, 850 RPM motor. Elliott Tool Roto-Jet cleaning systems are an effective solution to increasing chiller, condenser, and other heat exchanger efficiency. Roto-Jet I Series Electric heavy duty models are ideal for mechanical contractors that perform tube cleaning on a regular basis. Equipped with a 1 HP motor, these cleaners are powerful yet simple to use due to their reversing capability.
$499.99 $426.99
-
Burndy Burndy Y750-2 750 Revolver Hypress Crimping Tool
The Burndy Y750-2 (part of the REVOLVER HYPRESS series) is a 12-ton, hand-operated hydraulic crimping tool. It is widely used by electrical professionals for crimping splices, taps, and terminals on copper, aluminum, and ACSR conductors. It features a rubber-coated C-head that rotates 355° for easy access in confined spaces.
$429.99 $408.05
-
MILWAUKEE Milwaukee Tools 49-16-2450 M12 Force Logic 1/2" Copper Press Tool Jaw
The Milwaukee M12 Force Logic Press Jaws are manufactured for the highest standards of press quality and durability in the industry. Designed for easy opening with one thumb, these jaws when used with the M12 Force Logic Press Tools represent a one-handed pressing solution for up to 1/2 in. pipe. M12 Press Jaws will deliver quality press connections on all major fitting brands including Viega ProPress Systems, Elkhart APOLLOXPRESS, and Grinnell G-Press copper systems. ( Reference Fitting Compatibility Chart) Highlights Enables Connections on Copper Designed for M12 FORCE LOGIC press tool (Sold Separately) Designed for use with all major fitting manufacturers including Viega ProPress Systems, Elkhart APOLLOXPRESS, and Grinnel G-Press copper systems. ( Reference Fitting Compatibility Chart) In-line design for unrivaled access
$159.99 $152.05
-
PROTO Proto 848HD Heavy-Duty Pipe Wrench, 6 in Opening, 48 in OAL Floating Hook Jaw
Features Forged steel jaw provides outstanding strength Full floating hook jaw, provides instant grip, easy release Large knurl and power threads provide fast, positive jaw adjustment Product Details 6" x 48" Serrated Jaws Cast Iron Straight Pipe Wrench (848HD) by PROTO®. If you’re looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it delivers unmatched levels of durability and strength needed to provide long-lasting service life. Superior in functionality, it will help you make any job easier and faster.
$239.99 $228.05
-
Vevor Vevor SL-1930 Pro Press Tool Pipe Crimping Kit Press Tool Battery Kit 1/2" 3/4" 1" Jaw
The press tool kit includes 2 battery packs; Each full charge enables up to 180 crimps, minimizing the need for frequent recharging; This ensures continuous operation, meeting the requirements of long - duration work. With a 30mm stroke, each crimping cycle of the VEVOR tool takes just 2 - 4 seconds; This rapid operation suits various work demands and scenarios, significantly enhancing productivity and getting tasks done faster. The VEVOR press tool features an OLED display; It offers real - time details about battery levels, working status, and crimping data; This allows users to closely monitor the tool's performance, enabling them to manage their work needs more effectively. High-Strength Crimping Jaws: Made from high-strength forged steel with heat-treated hardening, these jaws offer extended crimping life; The head design supports 360° rotation, making work in elevated or tight spaces easier; Fast Crimping Operation: Each crimping cycle takes only 2-4 seconds with a 30mm stroke, providing a quick and precise crimping process; This propress tool saves work time and improves productivity; Equipped with an OLED display for clear visibility of battery levels, working status, and crimping data, allowing users to monitor tool conditions in real time; Long-Lasting Battery Life: Comes with 2 20V 2.0Ah batteries, our pro press copper crimper tool allows up to 180 crimps per full charge, leading the industry in performance; Suitable for extended and high-volume work requirements; Convenient Operating Experience: This electric copper pipe crimping tool is compact in size, ideal for tight spaces and overhead tasks; Ergonomically designed handle for comfort; safety pin locks attachments in place to prevent unsafe conditions, providing greater operational flexibility and comfort for users; Wide Application Range: Automatic crimping with electric control, saving time and effort; The copper press tool automatically returns to the starting position after crimping, suitable for crimping copper pipes; Ideal for residential and other industrial applications; Specification: Item Model Number: SL-1930; Voltage: DC18V; Rated Output: 19KN; Crimp Time per Cycle: 2-4 s; Stroke: 30 mm; Net Weight: 22.7 lbs / 10.3kg; Product Dimension: 16.1x3.1x4.7 inch / 410x78x120 mm
$475.00 $451.05
-
DEWALT DEWALT DCE400D1 20-Volt Max Lithium Ion Cordless PEX Expansion Tool Kit
Expand PEX Type-A tubing from 3/8 in. to 1 in. with the 20V MAX* XR Cordless 1 in. PEX Expander. It's proudly made with global materials. An automatic rotating head helps to ensure even expansion. The bright on-board LED work light and full trigger actuation make it an excellent tool in dimly lit, tight spaces. Carry this tool conveniently around the jobsite with a dual-sided hang hook and belt hook. Rubber overmold on the handle provides an ergonomic grip to keep you comfortable all day. This tool uses DEWALT(R) PEX Heads, and it is compatible with leading competitive PEX heads. Highlights Automatic rotating head action for even expansion Full trigger actuation for use in tight spaces Bright LED work light to help illuminate dark areas Dual-sided hang and belt hooks for convenient storage Rubber overmold for comfortable, ergonomic grip
$329.99
-
Urrea URREA 36 in. Long Aluminum Pipe Wrench 836A
Works just like the iron pipe wrench but the advantage of weighing less. Provides the same strength because its body is made from a single piece of aluminum, which together its design offers hardness similar to that of iron. Features all the advantages of a conventional Stillson wrench but is 40% lighter; this is why Urrea's aluminum pipe wrenches are essential to carry out heavy work.
$69.99 $66.05
-
Burndy Burndy Y35 12-Ton C-Head Manual Hydraulic Compression Crimping Tool w/ 13 Die Sets
Comfort grip handles Trigger controlled ram release Short handle throw Rubber covered handles 180° head rotation C-shaped head Hole for lifting eye Positive push button die locks Rubber body covering Built-in automatic 10,000 psi "Blow-Off" pressure release valve Rapid ram advance handle Y35-2 has rubber covered head Compact C shaped head allows easy placement and removal from continuous conductor lengths, Easy to position tool for work with 180° head rotation, Body and handles covered with 3/16 molded rubber for tool impact protection, Easy die change accomplished with push button die locks
$399.99 $360.10
-
RIDGID Ridgid 31028 RP 210 ProPress Compression Tool w/ 1-1/4" 1" 3/4" 1/2" Jawas
Say "hello" to your little friend! RIDGID® introduces the ultimate in press tool technology: the RP 210-B. For a fast and reliable way to join copper, stainless steel and PEX, the new RP 210-B has more capacity than any compact press tool on the market. This model is 2 inches shorter and 25% lighter than our previous compact tool and features the longest service interval available (32,000 cycles), an improved swiveling barrel and a powerful 18V Lithium-Ion battery. Now you can do more? with less! Choose the company that introduced America to press technology. Choose RIDGID. Features Capacity: 1/2" ? 1 1/4" (Copper & Stainless Steel), 3/8" - 11/2" (PEX) 270° Barrel/Jaw Swivel Battery: 18V Li-Ion 1.1Ah Weight: 6.4 lbs. with Battery Battery Charger: 115V Hydraulic Ram Output: 5,400 lbs. (24kN) Operating Temperature Range: 15°F to 122°F Approximate Cycle Time: 5 seconds Compatible with all RIDGID® Compact Series Pressing Attachments
$999.99 $900.10
-
Milwaukee Milwaukee 48-16-2657C F1807 2 Inch Pex Crimp Jaw
The PEX Crimp Jaws for M18™ FORCE LOGIC™ Press Tools provide an easy to use solution for PEX crimp installations, eliminating the repetitive strain required with hand tools. With an easy open, in line design, the jaws are optimized for the tightest spaces, utilizing the M18™ FORCE LOGIC™ Press tool, or the extended stroke M18™ FORCE LOGIC™ Long Throw Press tool. These PEX crimp jaws offer the highest confidence for quality connections, as the spring-loaded opening grips the ring for precise alignment to the fitting, and a green light on the press tool indicates a completed crimp. Compatible with F1807 Connections.
$229.99 $207.10
-
Reed Reed Tools H-4 Hinged 2-4” Capacity Heavy Steel Pipe Cutter
Pipe Capacity: 2 in. to 4 in. H4 will cut cast iron, ductile iron, and aluminum pipe. Full-closed frame for maximum efficiency under minimal effort. 90° to 110° handle swing. Guide fingers ensure accurate wheel alignment for even cut.
$129.99
-
RIDGID Ridgid ProPress 1 Inch Copper Crimping Die Jaw
Designed in conjunction with the ProPress System fittings, ensuring total system compatibility.
$149.99
-
DEWALT DEWALT DCE400 20V Max Cordless PEX Expansion Tool & Attachments
The pex tool expands 3/8-inch - 1-inch Pex Type-A tubing The pex expander tool has an automatic rotating head action for even expansion The pex expansion tool comes with full trigger actuation for use in tight spaces Bright LED work light to help illuminate dark areas Dual-sided hang and belt hooks for convenient storage Rubber overmold for comfortable, ergonomic grip Uses DEWALT PEX Heads. Compatible with Milwaukee and Uponor Heads.
$259.99
-
Milwaukee Milwaukee 49-16-2650 M18 Force Logic 1/2 in. Compression Press Tool Jaw
M18 1/2" Jaw The product is easy to use and easy to handle The product is highly durable
$169.99 $153.10
-
KLEIN TOOLS Klein Tools VDV226-110 Pass Through Ratcheting Cable Crimper and Stripper
Klein Tools VDV226-110 Pass-Thru Modular Wire Crimper, All-in-One Tool
$24.99 $22.99
-
AMPHENOL Amphenol Solar Technologies Helio H4 H4TC000 PV Panel Connector Crimper
The connector meets NEC 2008/2011 requirements without the need for extra locking collars or locking sleeves and is available in four different gauges including 14 AWG rated at 32A, 12 AWG rated at 40A, 10 AWG rated at 44A and 8 AWG rated at 65A. Amphenol Industrial can help you power the planet with the sun. The H4 PV Panel Connector is just one product out of many solar interconnect solutions AIST has to offer.Features: UL and TÜV dual approval Fully intermateable with industry standard Meets all NEC 2008/2011 requirements Quick and easy secure snap lock mating Simple unlocking tool meets NEC requirements Long-term UV and Ozone resistance Highest current rating in industry RoHS compliant Complete Cable Assemblies available Low contact resistance means low loss
$119.99 $108.10
-
Imperial Imperial Eastman 537-F 37-degree Rol-Air Flaring Tool 3/4-1 1/4"
Three cylinders in flaring cone roll out 37° flare above die block. Flares soft steel, copper, aluminum and fully annealed stainless steel tubing. Roller action reduces effort required; maintains original wall thickness; eliminates stress concentration. Feed release and burnishing action. Vise clamp extension on yoke. Heat treated dies clamp tubing without marking it. Satin chrome and black finish. Includes metal tool case. Variations and Replacement Parts 537-F : Flares and burnishes 3/4”, 7/8”, 1” and 1-1/4” O.D. tubing. Wt. 13.0 lbs.
$289.99
-
FCI FCI Burndy MRC840 Electrical Wire Cable 8 to 4/0 AWG Crimper
Spring loaded mechanism locks die wheel into position Press mechanism to release Rotating die wheel color coded marked with AWG sizes Steel jaws Comfort Grip Handles, Heat Treated Steel Jaws, Approximately 9000 Crimp Cycle Life, Lasts Longer Than Imitations And Will Still Be Working When Others Have Worn Out, 9 Position Color-Coded Rotatable Die Wheel, Engraved Crimp Groove (Die Index Number), Die Index Embossment Allows Permanent Inspectability Of Installed Connectors To Ensure Consistently Reliable And Dependable Connections
$199.99 $170.99
-
Ridgid Ridgid 700 Power Drive Pipe Threader Electirc Threading Machine
Built on the trust of the trades, you need tools designed for experts and built to last. Experience strength and durability with the RIDGID 700 Hand-Held 115-Volt Power Drive Pipe Threader (catalog number 41935,model 700). This handheld 115-Volt power drive delivers heavy-duty performance with an easy to operate design featuring all spur gear reduction, sturdy spring loaded adapter pawl, hardened steel spindle gear, and a double throw reversible switch for convenient forward and reverse rotation. It's compact build can easily fit into tight spaces and is ideal for the demanding needs of mechanical, electrical, and plumbing contractors. This versatile pipe threader cuts both right and left-hand threads in seconds and can also be used to power RIDGID 258 and 258XL Power Pipe Cutters. It has an ideal 1/8 in. to 2 in. pipe capacity, 1/4 in. to 1 in. thread bolts, and can accommodate 1/8 in. to 2 in. RIDGID 12-R, 00-R, 00-RB, and 11-R Die Heads by using adapters. Constructed with high-quality rugged materials, this threader tool features a durable cast aluminum housing, a heavy-duty switch, and ultra strong components that can withstand daily and heavy-duty use for a long-lasting tool life. RIDGID is a global manufacturer trusted by the skilled trades in more than 100 countries. BUILT FOR THOSE WHO KNOW. Handheld 115-volt power drive provides reliable power for pipe threading jobs with an ideal 1/8 in. to 2 in. pipe capacity Great for the demanding needs of mechanical, electrical and plumbing contractors Machine is built with all spur gear reduction, sturdy spring-loaded adapter pawl and hardened steel spindle gear Double throw reversible switch provides convenient forward and reverse rotation Features 1/4 in. to 1 in. thread bolts and can accommodate 1/8 in. to 2 in. RIDGID 12-R, 00-R, 00-RB and 11-R Die Heads by using adapters High-quality rugged construction with a durable cast aluminum housing, heavy-duty switch and ultra strong components for a long-lasting tool life
$649.99 $617.05
-
Rota Crimp Amp Industries Rota-Crimp 8-4/0 AWG Hand Crimping Tool 600850 USA
The 600850 is a Rota-Crimp Hand Tool without ratchet for the battery terminals and lugs. It is suitable for use with the AMP SOLISTRAND, tubular and CABLE MAKER battery terminals and splices. The hand crimping tools feature two rotating crimping dies that are held in place by spring–loaded indexing pins. Each die is positioned using a spring–loaded die locator pin. Wire size designations are embossed on the crimping dies to ensure proper setting of the crimping area, and a die order chart is included on the tool for reference. The dies are positioned according to the die order chart as shown in the datasheet. For use with Ring Terminals, Butt Splices, Parallel splices
$129.99
You have seen 24 out of 76 products