Home Receivers

The simple streaming update to your stereo or receiver. Add connect to stream with your existing stereo then easily expand your Sonos system to more rooms Enjoy music, podcasts, audiobooks, and internet radio with your amplified audio equipment. You can also stream vinyl, CDs, and stored audio files to Sonos speakers in other rooms of your home The Sonos app brings all your streaming services together, so you can get to the music you want quicker and control the sound in every room Use the line in to connect your turntable, or play music straight from a friend's phone on your stereo. Auto-switching 100-240 V, 50-60 hertz AC universal input

Read more less

Inputs: DVI, HDMI, Component, Composite S400m, Coax antenna, Coax cable, 1/8" (front), PC monitor Outputs: Coax cable, optical, VCR control

Read more less

AM/FM stereo, CD player, auxiliary, tape & video inputs, A/B speaker out via composite. For use with compatible subwoofers and speakers.

Read more less

6 zones (40 watts per zone) - 6 A/V Source Inputs and loop outputs - 6 variable line outputs, routed IR - 4 A-BUS ready sub-zones, adjustable bass/treble/loudness/balance - Built-in IR Learner and Pre-programmed IR library - paging and doorbell muting - Ront and rear RS-232 serial ports, color-coded detachable 14-gauge snap connectors, front panel A/V auxiliary input, rack-mount 2-unit high. 6 IR Emitters, 12 Volt & H.T. triggers.

Read more less

Experience enhanced home theater sound from almost anything you watch--with greater simplicity than traditional five-speaker surround systems. The 3·2·1 GS Series III DVD home entertainment system delivers cinematic 2.1-channel sound with just two Gemstone speakers and a hideaway Acoustimass module. The system includes an elegant media center featuring a progressive scan DVD/CD player with HDMI output and AM/FM tuner.

Read more less

  Amplifier Section 8-ohm FTC rated power/ch 4-ohm FTC rated power/ch 2-ohm dynamic power/ch Bridged mono power 4/8-ohm FTC rated THD Rated full power bandwidth S/N-IHF A-Weighted,dB Slew Rate Dimensions (HxWxD inches) Comments Tuner Section IHF Sensitivity mono/stereo,dBf Capture ratio,dB AM Suppression,dB Alt. ch. sensitivity,dB Seperation at 1kHz,dB THD at 1kHz,stereo Maximum S/N,stereo,dB Station presets Comments PreAmp Section Frequency response Maximum Output Total Harmonic Distortion S/N-IHF A-Weighted Phono sensitivity for 0.5V@1kHz MM Phono Overload mV Phono input capacitance pF MM S/N A-weighted 0.5v ref. MC S/N A-weighted 0.5v ref. Tone Controls Inputs Comments    

Read more less

Tuning range: FM, MW Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.5% Damping factor: 50 Input sensitivity: 3mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 70dB (MM), 75dB (line) Channel separation: 40dB (MM), 45dB (line) Output: 200mV (line), 35mV (DIN) Speaker load impedance: 4Ω to 16Ω Semiconductors: 3 x FET, 4 x IC, 52 x transistors, 31 x diodes, 3 x zener diodes Dimensions: 462 x 162 x 338mm Weight: 15.1kg Year: 1971

Read more less

Tuning range: FMPower output: 45 watts per channel into 8Ω (stereo)Frequency response: 20Hz to 25kHzTotal harmonic distortion: 0.5%Input sensitivity: 2.8mV (MM), 210mV (line)Signal to noise ratio: 90dB (line)Channel separation: 55dB (line)Speaker load impedance: 4Ω to 16ΩDimensions: 16-3/4 x 5-1/8 x 11-7/8 inchesWeight: 29lbsYear: 1965  

Read more less

High quality integrated amplifier Power amplifier sectionCircuitry All stage direct DC servo circuitsEffective output (both ch drive,Sine wave continuous power, 20Hz - 20kHz) 140W+140W (4Ω)70W+70W (8Ω)All the harmonic distortion factors (at the time of effective output) 0.003% or lessCross modulation distortion factor (at the time of effective output) 0.003% or lessFrequency characteristic 5Hz - 300kHz Pre-amp sectionCircuitry All stage direct DC servo circuitsInput sensitivity/impedance Phono MM: 2.5mV/47kΩCD, Tuner, AUX and Tape1, 2: 150mV/10kΩOutput level/impedance Rec output: 150mV/100ΩPre-amp output: 1.23V/600Ωsignal-noise ratio Phono MM: 90dB (- 142dBV)CD, Tuner, AUX and Tape1, 2: 110dB (- 126dBV)RIAA deviation 10Hz - Within 100kHz ±0.2dBPhono maximum permissible input 300mVInput/output phase In-phase SynthesisPower circuit system Stage independent shunt regulator system + reserve power sourceElectric power consumption 250WExternal size Width 430× height 150× depth 430mmWeight 24kg  

Read more less

State-of-the-art 1080p and 4K Ultra HD (3840 x 2160) video up scaling functions Networking with Airplay, Pandora, Spotify and Sirius XM Internet Radio (U version) Marantz remote app; easy setup with setup assistant and GUI HDMI 7 in/3 out (front in: 1) Audyssey MultEQ, Audyssey Sub EQ; Audyssey LFC Simplicity and elegance characterize the SR7008. With its iconic porthole display plus the drop-down door on the brushed aluminum front panel, this receiver offers both style and comprehensive features, including an Ethernet port, seven HDMI inputs, three HDMI outputs, and playback of the latest high-definition audio formats. The SR7008 is equipped with DTS Neo:X and Audyssey DSX that make full 9.2-channel playback possible when you set up speakers for the front height or front wide channels. With this system you can enjoy highly spacious 3D sound with uniform quality and powerful performance from all nine channels. Marantz’s proprietary HDAM audio circuitry, Current Feedback topology, and nine fully-discrete 125-watt amplifiers deliver the dynamic, beautifully detailed sound you expect from a receiver of this caliber.  

Read more less

Specifications Frequency response: 5Hz to 85kHz Total harmonic distortion: 0.003% Input sensitivity: 2.3mV (MM), 200mV (line) Signal to noise ratio: 90dB (MM), 100dB (line) Channel separation: 75dB (line) Output: 2V (Pre out) Dimensions: 432 x 289 x 76mm Weight: 5.2kg    

Read more less