Pneumatics
-
Blue Point Blue Point AT145A Long Barrel Pneumatic Air Hammer
The Blue Point AT145A is a long-barrel pneumatic air hammer designed for automotive and industrial body work, featuring a quick-change chuck retainer for rapid bit swaps. The 1/4"" air inlet connects to shop air, and the tool accepts standard air chisel bits for tasks including chiseling, cutting, scaling, punching, and panel work. Blue Point, distributed by Snap-on, is built to professional grade standards with an all-metal body for durability in heavy shop use.
$99.99 $95.05
-
Bostitch Bostitch BTFP71917 Smart Point 16 Ga Pneumatic Air Finish Nailer
The Bostitch BTFP71917 is a Smart Point 16-gauge pneumatic straight finish nailer that drives 16 GA finish nails from 1-1/4"" to 2-1/2"" in length for crown molding, baseboards, cabinets, chair rails, hardwood flooring, and decorative trim. Smart Point technology uses a specially designed smaller nose—80% smaller than standard Bostitch nailers—that provides easier nail placement in tight spaces and eliminates the need to compress the contact trip to actuate the tool. Oil-free operation prevents staining on work surfaces, and the tool features Dial-A-Depth control for precise countersinking, a tool-free jam release mechanism, a selectable trigger for sequential or contact firing, rear air exhaust, and a belt hook with integrated pencil sharpener.
$79.99 $76.05
-
Dewalt Dewalt D51276 15-Gauge 1 in.-2-1/2 in. Angled Pneumatic Air Finish Nailer
The DEWALT D51276K is a heavy-duty pneumatic 15-gauge angled finish nailer that drives 1"" to 2-1/2"" 34° collated DA-style finish nails at 70–120 psi operating pressure. The Sealed Lube Dual Tech motor runs as both an oil-free and oil-lube unit for maximum versatility. Tool-free features include adjustable depth-of-drive for flush or countersunk nails, jam clearing, a 360° exhaust port, and an adjustable belt hook. A low-profile no-mar pad protects finished work surfaces, and the sequential action trigger delivers precise, controlled nail placement. Weighing just 3.85 lbs,
$74.99 $71.05
-
Hitachi Hitachi NR90AD Paper Collated 3-1.2" Pneumatic Air Framing Nailer Nail Gun
APPLICATIONS: Great Paper Strip Framing Nailer for flooring and framing, truss build-up, roof decking, wall sheathing and housing construction LIGHTWEIGHT: At only 7.0 lbs and well-balanced allowing for ease of maneuverability and less user fatigue SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch AWARDS: Rated the Pro Preferred Nailer for 12 years running (2014 - 2025) by Builder and Developer Magazine
$100.00 $90.10
-
Campbell Hausfeld Campbell Hausfeld Ironforce IFT101 3/8" Pneumatic Air Ratchet
The Campbell Hausfeld Iron Force IFT101 is a 3/8-inch pneumatic air ratchet wrench designed for automotive and workshop tasks, such as tightening or loosening bolts in tight spaces. It is typically featured in "Iron Force" branded air tool sets. Drive Size: 3/8 inch Construction: Durable iron construction Usage: Suitable for mechanics or DIY, often used in automotive engine work Condition: Frequently found on the used market (eBay/Mercari), sometimes listed as "tested and working" or as part of a set with an air cut-off tool Origin: Made in Taiwan
$30.00 $28.05
-
Mac MAC TOOLS MPF59038 3/8" High Power Pneumatic Air Ratchet
Dual-drive system enables easy changing between 3/8" and 1/2" drive providing added versatility over traditional fixed-anvil designs
$150.00 $135.10
-
Matco Matco Tools MT2769 1/2” Impact Wrench Heavy Duty Air Pneumatic Tool
Matco Tools’ 1/2" Impact Wrench, No. MT2769, offers a breakaway torque of 1,300 ft/lbs. An exclusive easy-change muffler design allows for effortless servicing and sound level adjustment. A one-hand forward/reverse push-button design, reinforced clutch mechanism, rear housing power adjustment and a tip valve variable speed throttle provide techs with power and speed. Textured housing provides an ergonomic grip, which promotes comfort and durability when using the tool, resulting in less user fatigue and more comfortable operation for the long haul.
$99.99 $80.20
-
MAC MAC Tools AH520 Medium Barrel Pneumatic Air Hammer
Type: Pneumatic Air Hammer. Shank Size: Uses .401 shank bits. Trigger: Variable speed trigger for control. Design: Ergonomic, comfortable to hold. Power: Pneumatic (air-powered).
$59.99 $57.05
-
Porter Cable Porter-Cable FC350A Clipped Head Pneumatic Framing Nailer 2″-3½″
Clipped Head Nailing: Drives 3-1/2 inch clipped head nails, suitable for a wide range of construction applications requiring precise fastening. Pneumatic Operation: Utilizes compressed air to deliver consistent power for efficient and reliable nail driving. Adjustable Depth Control: Allows for tool-free adjustment of nail depth, accommodating various material densities and ensuring flush fastening. Durable Construction: Engineered to withstand rigorous job site conditions, ensuring long-term performance and reliability. High Capacity Magazine: Designed to hold a substantial quantity of nails, reducing the frequency of reloads and promoting continuous workflow.
$79.99 $76.05
-
MAKITA Makita AN923 3-1/2" 21° Full Round Head Pneumatic Air Framing Nailer
Integrated three-mode selector switch (bounce, sequential, lock) allows user control over firing options Built-in air filter minimizes dust and debris from entering tool Tool-less depth adjustment with nine settings allows user to drive nails to the precise level on the wood's surface To prevent dry firing, tool stops when three nails remain in the magazine Large capacity air chamber increases power yet is compact enough to fit between 16 in framing studs Retractable hook so tool can remain close by but never in the way Sharp, pronounced spurs grip wood for controlled firing at an angle Durable rear loading aluminum magazine has large nail holding capacity Rubber bumpers protect the tool and surface from damage Exhaust port directs exhaust air away from user Rubber grips for better control and comfortable handling
$119.99 $84.30
-
Mac MAC Tools AG325S 1/4" Collet Premium 0.3-hp Straight Air Die Grinder
0.3 HP motor Comfortable rubber grip keeps users' hand isolated as unit gets cold from use Precision collet for accurate material removal Throttle with lockout allows for precise control 360° Rotating exhaust to direct air flow away from body Tool-free power adjustment
$49.99 $47.05
-
Mac Mac Tools AG325AH90 Mini Die Air Grinder 1/4” 90 PSI 2300 RPM
0.3 HP motor Comfortable rubber grip keeps users' hand isolated as unit gets cold from use Precision collet for accurate material removal Throttle with lockout allows for precise control 360° Rotating exhaust to direct air flow away from body Tool-free power adjustment
$69.99 $66.05
-
INGERSOLL RAND Ingersoll Rand 2236QTIMAX DXS2 1/2" Air Impact Wrench
The Ingersoll Rand 2125QTiMAX Impact Wrench is a high-powered and durable tool designed for professional automotive and industrial applications. With a maximum torque of 332 ft-lbs, this impact wrench is capable of handling even the toughest jobs with ease. The 2125QTiMAX Impact Wrench features a twin-hammer mechanism that delivers consistent and smooth torque output. It also has a patented four-position power regulator that allows for precise control of the tool's torque output, making it an ideal tool for a range of applications. The wrench also has a one-handed forward/reverse control that allows for quick and easy switching of directions. Its ergonomic handle reduces fatigue and provides greater comfort and control during extended use. The 2125QTiMAX Impact Wrench is built to last with a rugged steel housing that can withstand the toughest working conditions. It also has a unique muffler that reduces noise levels during operation, making it a quieter tool than many of its competitors. In addition, this impact wrench is easy to maintain with a simple two-piece construction that allows for easy access to internal components. It also has a convenient air inlet swivel that prevents twisting of the air hose during use. Overall, the Ingersoll Rand 2125QTiMAX Impact Wrench is a high-powered and reliable tool that is built to handle even the toughest jobs with ease. Its twin-hammer mechanism, patented power regulator, and ergonomic design make it a must-have for professionals in a range of industries.
$159.99 $120.25
-
Omer Omer SG44.32 18 Gauge 3/8" Crown Stapler for Senco M Staples
Staplers that provide a mid size motor with ample power for production of every woodworking category from Kitchen and Bath Cabinetry, to case goods, furniture, lattice panels, screening, heavy duty upholstery requirements, carrying staples up to 25mm leg length with medium crown width. Mobile Home and R.V. production, boats, snow mobile and personal water craft heavy seat materials. The list goes on and on for these staples ideal applications. Speed is important to this category of staplers, but consistent delivery of power is of equal need, as well as driving the staple to the same depth. This is what Omer's 220 motor staplers are famous for providing. Italian know how shines through, as you study the maneuverability, bump fire cyclic speed and utter reliability that's built into Omer staplers.
$129.99 $84.35
-
Blue Point Blue-Point® by Snap-on AT120LRA 1/4” Right Angle Extended Mini Air Die Grinder
• 4-1/2" of extended reach, with a 90° head • Comfort grip reduces fatigue • Built-in speed regulator matches tool speed to the job • Safety throttle releases lever to shut off tool • .45 HP motor with 18,000 RPM free speed
$199.99 $150.25
-
Snap On Snap-on Tools MG725 1/2" Drive Heavy-Duty Air Impact Wrench USA Blue
The Snap-on MG725 ½-inch Impact Wrench features: • Outstanding 1,190 ft. lb. bolt break away torque. • 810 ft. lb. working torque. • One-piece precision machined magnesium housing yields an extremely durable lightweight, balanced unit with minimal vibration. • Superior control with less user fatigue. • 8-vane rotor provides faster motor start up and greater performance with more torque. • Single chamber motor provides greater power and speed to remove stubborn bolts. • Muffler kit reduces noise for quiet performance. Work longer with less auditory strain. • Patented cushion grip ribbed handle cover resists most shop chemicals and is easily field replaced. Helps insulate tool from cold and reduces vibration. • Patented tip valve trigger provides increased air flow and greater tool control. • Twin hammer impact mechanism is durable and hard hitting. Fewer parts means less down time. • Sealed in oil bath lubrication with Red Line Synthetic Oil - always keeps impact mechanism lubricated for less wear. • Slim style nose is ideal for working in restricted access areas. • Anvil stop feature - anvil stops when trigger is released and prevents anvil from throwing nuts and sockets.
$239.99 $216.10
-
Snap On Snap-on Tools MG725 1/2" Drive Heavy-Duty Air Impact Wrench USA Green
The Snap-on MG725 ½-inch Impact Wrench features: • Outstanding 1,190 ft. lb. bolt break away torque. • 810 ft. lb. working torque. • One-piece precision machined magnesium housing yields an extremely durable lightweight, balanced unit with minimal vibration. • Superior control with less user fatigue. • 8-vane rotor provides faster motor start up and greater performance with more torque. • Single chamber motor provides greater power and speed to remove stubborn bolts. • Muffler kit reduces noise for quiet performance. Work longer with less auditory strain. • Patented cushion grip ribbed handle cover resists most shop chemicals and is easily field replaced. Helps insulate tool from cold and reduces vibration. • Patented tip valve trigger provides increased air flow and greater tool control. • Twin hammer impact mechanism is durable and hard hitting. Fewer parts means less down time. • Sealed in oil bath lubrication with Red Line Synthetic Oil - always keeps impact mechanism lubricated for less wear. • Slim style nose is ideal for working in restricted access areas. • Anvil stop feature - anvil stops when trigger is released and prevents anvil from throwing nuts and sockets.
$239.99 $156.35
-
Snap On Snap-On MG325 Impact Air Gun Wrench Pneumatic Automotive Tool 3/8" Drive Red USA
425 ft-lb (576 N?·m) of bolt breakaway torque and 325 ft-lb (440 N?·m) of torque output • Compact size and slim-style nose are great for working in tight spaces • Balanced lightweight housing provides superior control with less user fatigue • 10,700 RPM for faster bolt removal • One-piece machined magnesium housing for precise internal component alignment to reduce vibration • Anvil stop feature means anvil will stop when the trigger is released to avoid throwing fasteners • Comfort cushion trigger button allows the user to work comfortably with less finger stress • Patented field-replaceable cushion grip handle absorbs vibration and insulates the user’s hand in cold temperatures • Continuous oil bath lubrication prolongs tool life by reducing premature component wear • Eight-vane motor delivers maximum speed and torque • One-handed forward/reverse lever for user convenience
$119.99 $78.35
-
Ingersoll Rand Ingersoll Rand 2025MAX Impactool Right Angle Impact Wrench 1/2in 90psi 9000rp
Power: With a finely tuned vane motor and power regulation, you’ll have full control of your tool while never having to settle for less power Access: Thanks to this wrench’s angle grip and composite housing, you’ll be able to access any hard-to-reach spaces with ease Fluctuation: The Right Angle Impact Wrench features a square socket retaining ring anvil, allowing it switch sockets with ease. Perfect for automotive repair work Feather touch trigger, 2-position forward power regulator, forward/reverse ring Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench Ergonomically sound rear exhaust system Offers the same reach as a ratchet
$169.99 $127.25
-
MAC Mac Tools MPH1911 Anti-Vibration Long Barrel Air Hammer
Quick-change retainer included for easy bit changes Variable-speed trigger for easy speed control Forward-handle design improves balance and ergonomics Comfortable rubber grip absorbs vibration for increased comfort during use, and provides maximum grip Anti-vibration technology reduces shock and increases comfort during use
$169.99
-
Snap On Snap-on Tools MG725 1/2" Drive Heavy-Duty Air Impact Wrench USA Red
• 1,190 ft-lb (1,613 N?·m) of bolt breakaway torque and 810 ft-lb (1,098 N?·m) of working torque • Faster motor start-up and greater performance with more torque than previous model • Balanced design for superior control and less user fatigue • Patented cushion-grip handle reduces vibration • Patented cushion grip tip valve trigger provides comfort and greater tool control • Anvil stops with release of the trigger to prevent throwing fasteners • Easy turn regulator for convenient speed control • Weighs 4.8 lb (2.2 kg) • Twin hammer impact mechanism is durable and hard hitting
$119.99 $108.10
-
INGERSOLL RAND Ingersoll Rand 261 Pneumatic Impact Wrench 3/4in 90psi 5500RPM
RELIABLE POWER WRENCH: The 261 Air Impact Wrench features a patented jumbo hammer mechanism and has a maximum torque of 1,100 ft-lbs, making it ideal for spring work, pinion nut removal, and more. CONVENIENT IMPACT DRIVER: This impact torque wrench is designed with a handle exhaust that directs air away from you, ensuring a comfortable working environment and reducing fatigue during use. HEAVY DUTY CONSTRUCTION: Our durable wrench can withstand the rigors of daily use. It features a Pressure-Feed Lube System to ensure trouble-free performance in the most demanding work conditions. IMPRESSIVE FEATURES: This powerful air impact tool has a variable speed throttle for extra control. The compact size and high output capabilities make it easy to manage for a variety of applications. UNLOCK YOUR POTENTIAL: For 160 years, Ingersoll Rand has been committed to making life better by creating innovative, durable, and quality tools. Our legacy is reflected in every product we make.
$149.99
-
Bostitch Bostitch BTFP71917 16 Gauge Smart Point Pneumatic Straight Finish Nailer
Drive 16 GA finish nails from 1-1/4-inch to 2-1/2-inch length with this pneumatic nailer Oil-free operation of the 16 gauge finish nailer reduces the risk of oil stains Tool-free jam release mechanism for easy nail removal Dial-A-Depth control for precise countersinking of nails Selectable trigger system for sequential or contact operation Other features: rear air exhaust, and belt hook with integrated pencil sharpener
$79.99 $72.10
-
Mac Tools Mac Tools AWP612Q 1/2" Drive Quiet Composite Air Impact Wrench
Tuned exhaust system for noise reduction with no loss of power Ergonomically designed handle Variable-speed trigger Lightweight composite body Twin clutch hammer
$109.99 $93.15
You have seen 24 out of 74 products