Vehicle Amplifiers

Max Power 1200W x 1 RMS Power output @ 2 ohms: 600W x 2 RMS Power output @ 4 ohms: 250W x 2 Variable 50-300Hz low pass filter with 12dB per octave slope High level sensing power on RCA and speaker level inputs; line level thru-put Low boost 0-10dB (40Hz) Dimensions: 15.8"W x 2.2"H x 10.8"D

Read more less

The Crossfire Distinct Audio 700 delivers robust amplification for serious audio installations. This 4-channel amplifier produces 450 watts at 2 ohms or 125 watts at 4 ohms per channel, providing flexible power options to match your speaker configuration and vehicle setup. 

Read more less

Product info: mono subwoofer amplifier 500 watts RMS x 1 at 4 ohms (800 watts RMS x 1 at 2 ohms) Class D amp technology AccuBASS® circuitry for improved bass response MILC™ (Maximum Input Level Control) LED optimization and clip indicators variable low-pass filter (30-230 Hz, 24 dB/octave) fixed subsonic filter: 24 Hz Other Features: preamp and speaker-level inputs GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input fuse rating: 40A x 2 wiring and hardware not included with amplifier 4-gauge power and ground leads recommended dimensions: 9-1/16"W x 2-1/8"H x 7-13/16"D

Read more less

8" Powered Subwoofer Enclosure Ultra-compact powered subwoofer system designed for tight locations Just over three inches high 8-inch internal subwoofer 150-watt RMS power amplifier KICKER’s first compact powered subwoofer brought home an International Consumer Electronics Show (CES) Innovations award for its design and engineering. Hideaway is made to fit under seats in a car or truck at just more than three inches tall. Its quick-connect Molex® plug and harness entails power, signal and remote turn-on for convenient plug-and-play performance, allowing for secure installation but simple fast removal if needed. The Hideaway comes with a remote bass control for fine-tuning bass levels, adjustable low-pass crossover, variable +6dB bass boost, phase-cancelling switch for max output, and two automatic turn-on options. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit. The KICKER Hideaway is sure to bring clear-sounding, ground-pounding bass to your car or truck.

Read more less

 V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performance and appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come. The Alpine MRP-M500 mono amplifier drives your subwoofer system with up to 500 watts RMS — enough to satisfy the hungriest bass setup. The low-pass filter puts you in command of the frequencies that reach your subs, while the variable bass boost is armed with plenty of low-end punch. A subsonic filter prevents wasted energy by eliminating ultra-low bass, putting all the power where you need it. Preamp- and speaker-level inputs allow you to connect this amp in almost any vehicle. Let a V-Power amplifier transform the sound of your car's audio system. mono subwoofer car amplifier 300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms) variable low-pass filter (50-200 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) subsonic filter (15 Hz, 24 dB/octave) Class D amp with MOSFET power supply

Read more less

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB). Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA.

Read more less

Dimensions (W x H x D): 12-5/8 inch x 2 inch x 6-5/8 inch Operating Voltage: 14.4V（11-16V allowable） Current Consumption: 60[A] CTA-2006 Compliant 2 Ohms Load Capability

Read more less

If you are all about that bass, you should be cruising around with Power Acoustic 2 Ohm Stable 2,500-Watt Max Subwoofer Amplifier in your ride. With a dash mount remote control, this amp is easy to control from the front seat. Thanks to the simple car stereo integration competence it can attach to a factory or upgraded car stereo. This amp provides maximum power in a compact size.

Read more less

Product highlights: two-channel car amplifier, 60 watts RMS x 2 at 4 ohms (100 watts x 2 at 2 ohms) 200 watts RMS x 1 bridged output at 4 ohms (4 ohm stable in bridged mode), variable high- and low-pass filters (50-200 Hz at 12 dB per octave) preamp- and speaker-level inputs, MOSFET power supply, CEA-2006 compliant, Tri-way capable (Tri-Way crossover required) fuse rating: 25A x 1, 10-gauge power and ground leads recommended — wiring and hardware not included with amplifier, Dimensions: 14-11/16"W x 2-3/8"H x 9-9/16"D.

Read more less

ELITE AUDIO 600W 4-CHANNEL AMPLIFIER 80X4 @ 4-OHM 

Read more less

𝗟𝗢𝗨𝗗, 𝗖𝗟𝗘𝗔𝗥, 𝗦𝗧𝗥𝗢𝗡𝗚 𝗦𝗢𝗨𝗡𝗗 from 225 watt 2 channel amplifier with R.E.M.I.T. for excellent FM reception from a Class D amp 𝗛𝗘𝗔𝗥 𝗠𝗨𝗦𝗜𝗖 𝗔𝗧 𝗥𝗜𝗗𝗜𝗡𝗚 𝗦𝗣𝗘𝗘𝗗 from 112.5 Watt x 2 at 2 ohms 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦 no radio "reflash" is required, new "DC Sensing" eliminates requirement for remote turn on lead. 𝗜𝗡𝗖𝗟𝗨𝗗𝗘𝗦 100% plug and play wiring and mounting plates for FLH "Batwing" and FLTR Road Glide models 2014-Current FLHX Street Glide 2014-Current FLHTK Limited Ultra 2014-Current FLHTCU Ultra Classic 2014-Current FLHTCUG Tri Glide Ultra 2015-Current FLTR Road Glide 2020-Current FLTRK Limited Road Glide Ultra 2016-Current FLTRU Road Glide Ultra

Read more less

Specs Peak Power: 1 x 1000W Power RMS 2Ω @ 14.4V: 1 x 500W Power RMS 4Ω @ 14.4V: 1 x 350W THD+N @ Nominal Power: 1% Frequency Response: 20Hz ~ 150Hz  SNR: 90dB Input Sensitivity: 0.2V to 6V Damping Factor: 260 Operating Voltage: 9V to 16V Low Pass Filter: 50Hz to 150Hz Bass Boost: Adjustable 0-12dB Bass Boost Center Frequency: 45Hz

Read more less

2 channel, 250 watts, low pass filter, adjustable level.

Read more less

Power your speakers on land or sea Kenwood's super-compact KAC-M1814 will add new clarity and impact to the basic sound system of almost any kind of vehicle on land or water, and it'll fit in a lot of places when space is tight. This marine-rated 4-channel amp will pump up your audio system with 45 watts RMS per channel — that's more than twice the power of most car stereos or marine receivers. The amp uses plastic covers to protect its connections and features a conformal-coated circuit board that keeps out moisture and salt, so the party won't stop just because of a little wetness. Works in almost any system The KAC-M1814 will accept a signal from just about any source, whether you're using RCA cables from an aftermarket receiver or speaker wires from a factory radio. When you use the speaker-level inputs, the amplifier will sense the signal and turn itself on, so you won't need to run a separate remote turn-on lead to the receiver or fuse box. Kenwood goes to great lengths to ensure good sound quality, putting the preamp and output power amp stages on separate circuit boards for better, cleaner performance.

Read more less

Cerwin Vega XED Series XED71000.1M Class-A/B 2 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 175watts x 1 chan. 2 ohms: 275 watts x 1 chan. 1 ohm: ------------N/A------------ Total power output: 1000 watts Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on Mono channel operation Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy duty aluminum alloy heat-sink Frequency Response: 10 - 250 Hz Total Harmonic Distortion (THD): .1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 250 Hz, 12 dB/octave Variable Bass Boost: 0 to +9 dB bass boost at 50 Hz Dimensions: 12.9"W x 8.875"L x 2.187"H

Read more less

The Dual Electronics XPR84D 2/1 High Performance Power MOSFET Class D Car Amplifier with 1,000-Watts of Dynamic Peak Power is a force to be reckoned with. Your Class D amplifier was engineered with specific linear circuitry that improves sound quality and power output while reducing distortion and refining efficiency for unrivaled sound superiority. We anticipated continuous use of your car amplifier so we engineered a High Current & Efficient MOSFET design that enables you to have insurmountable power. The MOSFET design enables you to have 1,000 Watts of Peak Power, 240 Watts RMS via 1 Channel (bridged) at 4 Ohms, 120 Watts RMS via 2 Channels at 2 Ohms and 80 Watts RMS via 2 Channel via 4 Ohms for unmatched sound quality. When designing your high performance Dual car stereo amplifier we wanted to make sure that you were always able to adjust the amplifier to meet your specific music needs. So we included the Full Range Crossover, which will allow you to link two high performance series amplifiers together for double the output and streamlined efficiency. Your Dual amplifier has a variable low-pass crossover (40Hz – 250Hz), variable high-pass crossover (40Hz – 250Hz), variable bass boost at 50Hz (0-12 dB) and variable gain adjustment (200mV ~ 6V). In addition, we added high and low level outputs, which allow high-level inputs to accept the speaker output signals and low-level inputs that accept preamp output signals. We cannot stress safety enough here at Dual Electronics so we designed a built-in short circuit protection via a thermal and DC offset safety for your amplifier that is Built for the Road Ahead.

Read more less

The Razor Series Class D Full-Range Amp (4 Channels, 1,200 Watts max) from Power Acoustik packs huge amounts of power into a small chassis thanks to efficient Full-Range Class D topology and SMT technology. Complemented with every possible preamp adjustment, Razor amplifiers leave nothing to be desired. The small compact chassis allows mounting in very small places where other amps just will not fit. Class D 4 Channels 1,200W Max 100W Rms X 4 @ 4Ohm  150W Rms X 4 @ 2Ohm  300W Rms X 2 @ 4Ohm Bridged Mosfet Pwm Power Supply With Audiophile  Military-Grade Smt Pcb Maintains Dynamic Performance 2Ohm Stereo & 4Ohm Bridged Full-Range Operation Direct Short, Thermal & Overload Circuits 200Mv-6V Low-Level RCA Inputs High-Level Input With Signal-Sense Auto Turn-On Variable 12Db High-Pass & Low-Pass Crossovers 10Hz-50Hz Variable Subsonic Crossover Protects Subwoofer Dim: 1.63"H X 9"W X 4.75"D

Read more less

Torque Series Monoblock Class AB Car Amplifier Max power output: 1500 watts  RMS Power Rating: Variable Bass Boost (0 to +18 dB bass boost at 50 Hz) Mono channel operation Speaker-level (high-level) inputs  4 ohms: 750 watts x 1 chan.  Variable low-pass filter (50-250 Hz, 24 dB/octave) Dimensions: 9.5"W x 10.2"L x 2.125"H  

Read more less

V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performance and appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come. The Alpine MRP-M500 mono amplifier drives your subwoofer system with up to 500 watts RMS — enough to satisfy the hungriest bass setup. The low-pass filter puts you in command of the frequencies that reach your subs, while the variable bass boost is armed with plenty of low-end punch. A subsonic filter prevents wasted energy by eliminating ultra-low bass, putting all the power where you need it.

Read more less

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Read more less

MOSFET power supply Bridgeable 700W Tri-mode capable Variable gain control Variable low pass crossover

Read more less

  mono subwoofer amplifier 150 watts RMS x 1 at 4 ohms (300 watts x 1 at 2 ohms) low-pass filter (80 Hz at 24 dB per octave) subsonic filter (25 Hz) bass boost (12 dB at 40 Hz) wired remote bass level control CEA-2006 compliant speaker-level inputs preamp inputs and outputs fuse rating: 20A x 2 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier 13-1/2"W x 2-1/8"H x 9-5/8"D If you love bass, you'll love Kicker's ZX mono amplifiers. These high-end amps set the standard for powerful sound, with a distinctive look that'll make your installation stand apart from the crowd. The ZX300.1 mono subwoofer amp will drive your subs with up to 300 watts of power. No inflated "peak power" ratings here — you can trust that this amp's CEA-2006 compliant rating reflects a true measure of its capabilities. Like all Kicker amps, it's built with high-quality internal components for reliable performance. The built-in low-pass filter removes high frequencies from the amp's output so you'll get the most out of your subwoofer, while a subsonic filter removes the extreme low bass that hampers system efficiency. Use the bass boost control to kick in a little more low-end bump — you can turn it on and off with the included wired remote control.

Read more less

300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V Cast Aluminum Heatsink with Stealth top mounted control panel

Read more less

Supply Voltage 11~15V DC Output Power Rating: @ 4Ω 120W x2 @ 2Ω 150W x2 Bridged: @ 4Ω 300W x1 Frequency Response: 20Hz-20KHz-3dB Signal Noise Ratio 89dB Input Impedance 22K Ohm Input Sensitivity 200mV-2V T.H.D. .03% Low Freq, 40Hz-250Hz Subsonic 40Hz-250Hz Bass Boost 0/+6/+12dB

Read more less