Shop pre-owned professional tools for every trade at ZeereeZ. Browse power tools, hand tools, diagnostic equipment, electrical testers, HVAC and refrigeration tools, plumbing and hydraulic equipment, measuring tools, welding gear, and workshop essentials from trusted brands.
Tools
-
MILWAUKEE Milwaukee 6232-81 Corded Deep Cut Variable Speed Band Saw Kit
The Milwaukee 6232-21 is an 11-amp corded deep cut variable speed band saw kit offering the industry's largest cut capacity of 5"" x 5"" material in a single pass. Exclusive Job Site Armor technology—made of a proprietary composite material with crush zone barriers—provides 2X more durability than previous models, while an all-metal direct drive gearing system delivers maximum tool life with less maintenance than chain-drive designs. A gear-protecting clutch absorbs high-impact forces from blade lock-ups, and CPT Constant Power Technology maintains cut speed under load. The slimmer motor housing improves line-of-sight for greater cut accuracy, and the tool-free locking adjustable shoe quickly adapts from extended to no-shoe configuration. At 14.5 lbs, the balanced body design reduces fatigue.
$199.99 $190.05
-
Matco Matco MBP1000 Ball Joint Service Repair Kit
The Matco MBP1000 is a ball joint service tool and master adapter set designed for the removal and installation of press-fit ball joints on domestic, foreign, and European cars and trucks. The kit includes a C-frame press along with receiver tubes and removing/installing adapters covering over 1,250 applications as detailed in the included guide. The C-frame press can also be used independently for universal joint removal and replacement. All components come organized in a hard-sided carry case for easy transport and identification at the job site.
$199.99 $190.05
-
Ritchie Yellow Jacket 68802 HVAC Refrigerant Electronic Charging Scale 110 Lb
The Ritchie (Yellow Jacket) 68802 is a digital electronic refrigerant charging scale with a 110 lb (50 kg) capacity designed for HVAC/R technicians. It eliminates refrigerant transfer between containers by allowing technicians to charge directly into or recover from a system while weighing the cylinder on the platform—real-time digital display shows exactly how much refrigerant is being added or removed. The heavy-duty platform features a sealed LCD display and membrane keypad for environmental resistance, mechanical and electronic overload protection, and a 0.5"" bold LCD display for easy reading in bright conditions. Runs approximately 25 hours on a single 9V battery. Compatible with any refrigerant in any system.
$149.99 $142.05
-
Blue Point Blue Point AT145A Long Barrel Pneumatic Air Hammer
The Blue Point AT145A is a long-barrel pneumatic air hammer designed for automotive and industrial body work, featuring a quick-change chuck retainer for rapid bit swaps. The 1/4"" air inlet connects to shop air, and the tool accepts standard air chisel bits for tasks including chiseling, cutting, scaling, punching, and panel work. Blue Point, distributed by Snap-on, is built to professional grade standards with an all-metal body for durability in heavy shop use.
$99.99 $95.05
-
Bostitch Bostitch BTFP71917 Smart Point 16 Ga Pneumatic Air Finish Nailer
The Bostitch BTFP71917 is a Smart Point 16-gauge pneumatic straight finish nailer that drives 16 GA finish nails from 1-1/4"" to 2-1/2"" in length for crown molding, baseboards, cabinets, chair rails, hardwood flooring, and decorative trim. Smart Point technology uses a specially designed smaller nose—80% smaller than standard Bostitch nailers—that provides easier nail placement in tight spaces and eliminates the need to compress the contact trip to actuate the tool. Oil-free operation prevents staining on work surfaces, and the tool features Dial-A-Depth control for precise countersinking, a tool-free jam release mechanism, a selectable trigger for sequential or contact firing, rear air exhaust, and a belt hook with integrated pencil sharpener.
$79.99 $76.05
-
Mastercool Mastercool Dual Manifold Gauge Set R134a/R12 with Hoses
The Mastercool 96361 is a 4-way aluminum manifold gauge set for R410A, R22, and R404A refrigerants, featuring three 3-1/8"" silicone-dampened gauges for smooth, accurate needle readings and an exclusive stainless steel ball valve design that rotates 90° between Teflon washers for effortless control even under pressure. The solid extruded aluminum body delivers durability with a full 3/8"" bore through the block for improved flow over standard manifolds. Gauges include an extra-large sight glass for visual refrigerant inspection and can be easily recalibrated in the field. The set includes three 60"" 1/4"" SAE nylon barrier ball valve hoses with manual shut-off valves (blue, red, and yellow) and one 60"" 3/8"" SAE black vacuum hose, all packaged in a blow-molded case.
$49.99 $47.05
-
Dewalt Dewalt D51276 15-Gauge 1 in.-2-1/2 in. Angled Pneumatic Air Finish Nailer
The DEWALT D51276K is a heavy-duty pneumatic 15-gauge angled finish nailer that drives 1"" to 2-1/2"" 34° collated DA-style finish nails at 70–120 psi operating pressure. The Sealed Lube Dual Tech motor runs as both an oil-free and oil-lube unit for maximum versatility. Tool-free features include adjustable depth-of-drive for flush or countersunk nails, jam clearing, a 360° exhaust port, and an adjustable belt hook. A low-profile no-mar pad protects finished work surfaces, and the sequential action trigger delivers precise, controlled nail placement. Weighing just 3.85 lbs,
$74.99 $71.05
-
Dual Saw DUALSAW CS450 4 1/2" Counter Rotating Dual Blade Circular Saw
The DualSaw CS450 is an 8-amp corded circular saw featuring patented counter-rotating dual blade technology, with two 4-1/2"" tungsten carbide-tipped blades spinning simultaneously in opposite directions at 5,500 RPM. This unique design allows the saw to cut forward and backward, perform plunge cuts without a pilot hole, and slice through wood, plastic, metal (including aluminum, copper, and stainless steel), PVC, Formica, rebar, and more—all without changing blades. The counter-rotating blades significantly reduce kickback, vibration, and sparks compared to single-blade saws, while a built-in lubrication system feeds wax sticks to cool the blades when cutting soft metals.
$69.99
-
Amprobe Amprobe AT-2004 / T2200 / R2000 / S2600 Advanced Wire Tracer Kit
The Amprobe AT-2004 is an advanced wire tracer that locates and traces energized and non-energized wires buried behind walls, floors, conduit, cable shielding, and computer cables up to 13 feet (4 m) deep—without interrupting power. It traces live wires and identifies circuit breakers and neutrals, pinpoints shorts and ground faults on de-energized wires, and locates the exact break point on open (disconnected) wires. A clamp-on attachment allows signal injection into wires when direct wire access is unavailable, and the unit does not interfere with sensitive electronics in hospitals or data centers.
$289.99 $275.05
-
Mac Tools MAC Tools FIT1100MS Master Fuel Injection Pressure Test Set Kit
The Mac Tools FIT1200MS is a master fuel injection pressure test set that contains everything needed to check fuel injection system pressures on most domestic and foreign cars and light trucks. The set features a large 3-1/2"" gauge (0–145 psi) and a smaller 2-1/2"" gauge (0–15 psi), both with rubber protective guards, connected via a quick-coupling system for fast adapter changes.
$169.99 $161.05
-
MILWAUKEE Milwaukee 2606-22CT M18 18V Cordless 1/2” Drill Driver Kit
The Milwaukee 2606-22CT M18 Compact 1/2"" Drill Driver Kit is the most compact and powerful drill/driver in its class. Built with a Milwaukee 4-Pole frameless motor and rare-earth magnets, it delivers 500 in-lbs of torque and 0–400/0–1,800 RPM from a body measuring just 7-1/4"" long for access in tight spaces. The all-metal gear case and 1/2"" metal chuck provide maximum durability on demanding job sites, while REDLINK Intelligence protects the tool from overload and manages temperature for extended life. Kit includes the 2606-20 drill/driver, two M18 CP1.5 REDLITHIUM compact batteries, an M18/M12 multi-voltage charger, and a carrying case.
$159.99 $152.05
-
BOSCH Bosch GNH18V-18MN 18V Cordless 18-Gauge Brushless Brad Nailer Nail Gun
The Bosch GNH18V-18MN is an 18V brushless 18-gauge cordless brad nailer that delivers pneumatic-like performance without the need for compressors or hoses. The efficient brushless motor consistently drives 18-gauge brads from 5/8"" to 2-1/8"" deep into tight spaces with minimal recoil. Paired with a CORE18V 4 Ah battery (sold separately), the tool fastens up to 2,000 nails per charge from a 105-nail magazine. Features include one-handed activation for both right- and left-handed users, an ergonomic thumb wheel for tool-free depth adjustment, selectable single/bump-fire mode.
$199.99 $190.05
-
3M 3M Scotchtrak TK-6B Circuit Tracer Kit for 9-600 Volts AC/DC
Live Circuit Tracing: Safely operates on powered circuits, though it also works on dead lines by connecting a battery in series. Signal Tracing: The transmitter injects a 4.5 kHz radio signal into the wires, which is detected by a handheld wand or receiver. Industrial Application: Rated for heavy-duty use up to 600V AC, commonly used by home and industrial electricians. Precision Tracking: Features adjustable gain levels and an audible tone to pinpoint exact breakers or route wires through walls.
$129.99 $123.05
-
Bostitch BOSTITCH SB150SLBC-1 3/4-Inch to 1-1/2-Inch Air Pneumatic Cap Stapler
The Bostitch SB150SLBC-1 is a pneumatic 2-in-1 combo brad nailer and finish stapler that drives 18-gauge brad nails and narrow-crown finish staples from 5/8"" to 1-5/8"" in a single tool. Operating at 70–100 psi with 135 in-lb of driving power, this lightweight 2.6 lb aluminum tool is ideal for interior and exterior finish and trim, furniture, cabinet work, staircases, paneling, and crafts. Features include an adjustable depth guide for consistent countersinking, tool-free adjustable exhaust to redirect air away from the user, a 100-fastener magazine, and a no-mar tip to protect work surfaces.
$79.99 $76.05
-
Matco Matco Tools CLT2PB Cylinder Leakage Tester Gauge Kit Diagnostic Tool
The Matco CLT2PB Cylinder Leakage Tester is a dual-gauge diagnostic tool that measures an engine cylinder's ability to hold compressed air, helping technicians assess engine health and identify the source of compression loss. Shop air is fed through the tool and into the cylinder via a spark plug hose, and two 2-1/4"" gauges simultaneously monitor input air-line pressure (0–100 psi / 0–7 bar) and the percentage of leakage (0–100%), with color-coded bands indicating low, moderate, and high leakage levels. The kit comes in a molded storage case and includes an M14 adapter suitable for use on most gasoline-powered engines.
$139.99 $133.05
-
CPS CPS CC100 Compute a Charge HVAC Refrigerant Scale
The CPS CC-100 Compute-A-Charge is an electronic refrigerant charging scale designed for HVAC/R technicians to accurately measure refrigerant quantities during charging, recovery, and evacuation. With a capacity of up to 110 pounds (50 kg), it eliminates the need to transfer refrigerant from tank to cylinder—the cylinder is simply weighed before and after charging to determine exact amounts added or removed. The scale operates on 9V batteries and features a handheld display, tare function for zeroing out container weight, auto-off after a period of inactivity, and overload protection. It accommodates standard refrigerant cylinders of multiple sizes.
$59.99
-
Cummins Cummins Industrial Tools 21-Piece Heavy Duty 3/4-Inch Drive SAE Socket Set.
The Cummins Industrial Tools 21-piece 3/4"" drive heavy-duty SAE socket set includes a full range of standard sockets from 7/8"" to 2"", along with extensions, a flex handle, and a 24-tooth ratchet for tackling large fasteners in automotive, industrial, and construction applications. Sockets feature a 12-point design with a chrome finish for maximum corrosion resistance, large laser-etched and hard-stamped size markings for quick identification, and a knurled ring for secure grip during socket removal. The set meets ANSI standards and comes organized in a blow-molded carrying case for easy storage and transport. Built with chrome vanadium steel for strength and durability under heavy torque.
$169.99 $161.05
-
Dewalt Dewalt DCS378B 20V MAX XR Cordless 3-3/8" Cut Capacity Bandsaw
The DEWALT DCS371 is a 20V MAX lithium-ion cordless portable band saw designed for cutting conduit, pipe, tubing, angle iron, and all-thread in the field. It features a centered handle position for superior balance and ergonomics, a 2-1/2"" cut capacity that handles up to 2"" SCH 40 pipe, and a no-load blade speed of 570 FPM. An integrated LED work light with a 20-second delay illuminates dark work surfaces, while a blade tracking adjustment and tool-free blade changing lever simplify maintenance and extend blade life. The dual bearing blade guide rollers increase durability, and an integrated hang hook allows safe storage without damaging the handle or base. Tool weighs 8.0 lbs and uses a 32-7/8"" blade.
$169.99
-
Solar SOLA LSB24D Big Red Aluminum Digital Box Beam Level
The SOLA LSB24D is a 24"" Big Red Aluminum Digital Box Beam Level featuring the patented FOCUS vial system with 60% magnification and a luminous backing for easy reading in low-light conditions. It delivers the highest measuring accuracy available in a box beam level—maximum deviation of ≤0.3 mm/m in standard position and ≤0.5 mm/m inverted—using an integrated Solatronic electronic inclinometer module with a measuring tolerance of 0.05° at 0° and 90°. The adjustable inclination display reads in °, %, in./ft., and mm/m, with a hold function for storing measurements and an audible mode for guidance. Rated IP65, the level is sealed against dust and water jets, and the extra-strong aluminum profile (890 g/m) with shock-absorbing 2-component end caps ensures durability on demanding job sites. Made in Austria.
$179.99 $171.05
-
CM CM Little Mule 04453W LGM4500 5000 lbs. Wire Grip, 0.18" - 0.6" Wire Size
The CM Little Mule 5000 lb (2-1/2 ton) Wire Grip is a spring-loaded, parallel-jaw wire grip built for utility linemen working with stranded copper and ACSR cables. It features a rated capacity of 2-1/2 tons (5,000 lbs), accepts wire sizes from 6 AWG to 4/0 AWG (.18"" to .60""), and opens easily for quick wire insertion and release without lock-up. The large handle eye opening accepts standard hooks and attaches to tackle blocks, while the forged steel construction provides durability with a lightweight profile. All models are rated for a variety of wire sizes, reducing the number of grip changes needed on the job.
$119.99
-
STIHL STIHL AK 10 36V Lithium-Ion Power Tool Battery Black OEM
The STIHL AK 10 is a compact, lightweight 36V lithium-ion battery weighing just 1.8 lbs, designed for the AK System lineup of cordless tools. It provides optimal run times for compatible tools including the MSA 60 C-B, FSA 57, FSA 60 R, HLA 56, HSA 56, BGA 57, and SHA 56, delivering full power throughout the entire runtime with no gradual power drop. An LED light display shows battery charge status, and the battery features built-in temperature monitoring that shuts it down if it overheats. Capable of withstanding up to 1,500 charge cycles, it supports clean, cordless operation without fuel or two-cycle oil costs.
$79.99 $76.05
-
Snap On Snap-on ACT750A HVAC & Automotive Refrigerant Gas Leak Detector
The Snap-on ACT750A Leak-N'-Spector is a handheld electronic refrigerant leak detector designed to identify leaks in automotive air conditioning systems. It is manufactured in the USA and is designed to detect halogenated refrigerants.
$99.99 $95.05
-
Snap On Snap-On Tools 9.6 - 18V Battery Charger Snap On CTC420 Genuine OEM
The Snap-on CTC420 is a genuine OEM 9.6V-18V battery charger designed for Snap-on cordless power tools, specifically for Ni-Cad (Nickel-Cadmium) battery packs. This compact, red and black charger is known for professional-grade, reliable, and relatively fast charging, often used in automotive environments to keep tools ready.
$39.99 $38.05
-
Snap On Snap On MT3000A440 Low Amps Probe Low Flow Current Device Vehicle Diagnostic Tool
Key Features and Description Functionality: Captures current waveforms and readings, allowing technicians to diagnose circuit issues without breaking the wire. Compatibility: Designed to work with Snap-on diagnostic tools, including the MT3000 series and various oscilloscopes or graphing multimeters. Design: A clamp-style probe for easy attachment to wires. Application: Ideal for identifying parasitic draws and analyzing component performance.
$89.99 $85.05
You have seen 120 out of 1669 products
