Tools | Plumbing & Hydraulic Tools
-
Rota Crimp Amp Industries Rota-Crimp 8-4/0 AWG Hand Crimping Tool 600850 USA
The 600850 is a Rota-Crimp Hand Tool without ratchet for the battery terminals and lugs. It is suitable for use with the AMP SOLISTRAND, tubular and CABLE MAKER battery terminals and splices. The hand crimping tools feature two rotating crimping dies that are held in place by spring–loaded indexing pins. Each die is positioned using a spring–loaded die locator pin. Wire size designations are embossed on the crimping dies to ensure proper setting of the crimping area, and a die order chart is included on the tool for reference. The dies are positioned according to the die order chart as shown in the datasheet. For use with Ring Terminals, Butt Splices, Parallel splices
$129.99
-
Reed Reed SC59-6 Heavy Duty Soil Chain Pipe Snap Cutter
Great for gray water applications. Soil Pipe Cutters apply chain pressure to snap the pipe. REED innovations have improved upon the original.
$239.99
-
Thomas & Betts Thomas & Betts UT5 Hand Compression Crimping Tool Crimper
Heavy duty manual compression crimper unparalleled in its durability.
$75.50 $45.50
-
Viega Viega 50020 1/2" PEX Compression Ring Hand Crimping Tool
Ratcheting design, color coded handles 35 lb crimping force Crimp ring press tool ensures a perfect connection every time The tool cannot be opened until the fitting has been properly pressed For 1/2 inch FostaPEX
$119.99
-
Reed Reed 2A Pipe Threader Threading Tool
Quick change dies, NPT, made in the USA.
$15.50 $9.50
-
Wheeler Wheeler 42” Cast Iron Chain Soil Pipe Snap Cutter with Chain USA
When the job requires a pipe be cut, but space is limited, your best option is a Wheeler-Rex manual chain pipe cutter. Often referred to interchangeably as chain cutters or snap cutters, the hardest working chain cutters feature a flexible chain that wraps around the pipe and locks in place. Inside each link of chain is a small circular cutting wheel. Once the chain is locked in place, you squeeze the handles together, pulling the chain tight. The cutter wheels create even pressure from all sides and cut into the pipe, creating a “pop” sound that mean your pipe has been cut cleanly and evenly. When you need fast, clean, even cuts, you need Wheeler-Rex. The hardest working pipe tools. Period.
$144.99
-
Panduit Panduit CT-1550 12-10 22-14 Contour Crimp Heavy Duty Crimper Crimping Tool
Manual ratchet crimper for use with conductors from #22 to #10 AWG (0.5 to 6 sq. mm) and matching insulated terminals, splices, and disconnects Ratchet mechanism for proper crimp force with each operation Two color-coded crimp pockets for use with a range of wire sizes Steel frame with black oxide finish for strength, durability, and resistance to corrosion Manual release lever for opening jaws before full crimp cycle when necessary
$119.99
-
Burndy Burndy Condi PAT81KFT-18V Patriot 18V 4-Point 6 Ton Hydraulic Crimp Tool
Battery-actuated hydraulic crimping tool for use with a range of copper and aluminum conductors and connectors Provides 6 tons (5.4 metric tons) of crimping force Dieless system eliminates the need for separate die sets C-head crimp mechanism with 360-degree head rotation for improved access to tight work spaces UL listed and CSA certified crimps with made with Burndy Hylug and Hylink compression connectors
$1,999.99 $1,499.99
-
Enerpac Enerpac JHA-1506 150 Ton 6" Stroke Aluminum Hydraulic Hand Jack
Internal relief valve to prevent overloading. Machined flat front and bottom surfaces permit flush alignment in tight corners Chrome plated plungers. . Automatic by-pass port to prevent over-extension (JH-series). (Kg): 95,3 Stroke (mm): 155 Bottom Plate Dimensions W x L (mm): 241 x 407 Jack Capacity ton (kN): 150 (1335) Plunger Diameter (mm): 158,8
$1,499.99 $500.00
-
RIDGID Ridgid 93060 Heavy Duty Replacement Double Jaw Set for 3233 Chain Tong
Genuine Ridgid replacement double jaw set designed for the 3233 chain tong. Heavy-duty construction ensures reliable gripping and cutting performance on pipes and tubing. Direct fit replacement part maintains the precision and durability of your original tool. Compatible with Ridgid 3233 chain tongs.
$75.50 $47.50
-
Milwaukee Milwaukee 2471-20 12V Copper Tubing Cutter 3/8" to 1" Rotating Cutting M12 Tool
AUTOMATIC ADJUSTMENT: Wrap this around type K, L, and M copper pipes and it will adjust from between 3/8" and 1” automatically WATER RESISTANT: The head of the unit is sealed tightly to prevent water from leaking in and damaging the motor. Ideal for plumbing applications HIGH POWERED MOTOR works at up to 500 RPM, letting you work up to 10 times faster than standard hand-operated pipe cutters or saws LOW CLEARANCE: You can use this with piping that is as little as 1 1/2“ away from a wall without risk of damage to the tool or pipe RED LITHIUM COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440
$79.99
-
Enerpac Enerpac RC51 & RC102 Hydraulic Cylinders for Repair
RC51 - 4.9 ton Capacity, 1.00 in Stroke, General Purpose Hydraulic Cylinder RC102 - 10 tons, 2-1/8in. Stroke L
$159.99 $143.99
-
Hilmor Hilmor 1839032 CBK Compact HVAC Bender Kit - 1/4" to 7/8"
Small in size. Big on advantages. The hilmor Compact Bender will help you get the job done right – from start to finish. Small-space capabilities, one-handed operation and precise bends – you get it all. A universal crossbar and color-coded mandrels provide simple setup and easy size identification. An advanced mandrel design and quick-release mechanism allow for an easy tube release. You can count on precise bends of 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” tubing up to 90°.
$199.99 $161.99
-
Unbranded Tube Belt Sander Stainless Steel Pipe Polisher Around Pipe Electric Sanding Tool
Professional for burnishing, finishing and re-conditioning stainless steel, steel, non-ferrous metals, plastic & wood. Max: 270 degree wrap angle to do efficient result/work. NOT ONLY a pipe polisher, but also a powerful variable speed wet dry use polisher / grinder. It can work with all 5/8"-11 thread abrasive tools (up to 5 Inch).
$199.99 $153.99
-
Unbranded Unknown Brand 6 inch Hydraulic Cylinder
It has an Enerpac connection but red paint residue. Its size suggests that its has around a 20 ton capacity. 2 inch stroke.
$99.99 $80.20
-
Ryobi Ryobi P661 18-Volt ONE+ Cordless PEX Crimp Ring Press Tool with Battery and Charger
RYOBI introduces the 18-Volt ONE+ PEX Crimp Ring Press Tool. With 320 crimps per charge (with the ONE+ P108 4.0 Ah LITHIUM+ Battery, not included) and an easy one-handed crimping operation, the Crimp Ring Press Tool eliminates user fatigue and allows you to get the job done faster. The crimp cycle takes less than 5 seconds with an LED light to indicate completion. The Crimp Ring Press Tool fits all PEX sizes from 3/8 in. to 1 in. The jaws of the tool fit a 1 in. ring, and die inserts for rings are included (3/8 insert not included) as well as a Go/No Go Gauge to ensure a proper crimp is achieved. Part of the Worlds Largest Platform of over 125+ tools, the ONE+ PEX Crimp Ring Press Tool is backed by the RYOBI 3-Year Manufacturer's Warranty, and includes a Go/No Go Gauge, a Belt Clip, 1/2 in. and 3/4 in. Press Die Inserts and Pouch, and an operator's manual. Battery and charger are sold separately. Easy one-handed crimping operation 320 crimps per charge using a P108 4.0 Ah LITHIUM+ High Capacity Battery (not included) LED lights indicate complete clamp cycle Dual LED lights to illuminate work space Less than 5 second crimp time for maximum efficiency Meets ASTM F1807 plumbing standard Go/No Go gauge included to ensure proper crimp is achieved Includes 1/2 in. and 3/4 in. die inserts (3/8 in. insert not included) Fits PEX crimp ring sizes 3/8 in., 1/2 in., 3/4 in., 1 in. 3-year manufacturer's warranty Includes: (1) P661 ONE+ PEX Crimp Ring Press Tool, Go/No Go gauge, belt clip, 1/2 in. and 3/4 in. press die inserts and pouch, and operators manual Battery and charger sold separately
$169.99
-
Ryobi Ryobi P661 18-Volt ONE+ Cordless PEX Crimp Ring Press Tool with Battery and Charger
RYOBI introduces the 18-Volt ONE+ PEX Crimp Ring Press Tool. With 320 crimps per charge (with the ONE+ P108 4.0 Ah LITHIUM+ Battery, not included) and an easy one-handed crimping operation, the Crimp Ring Press Tool eliminates user fatigue and allows you to get the job done faster. The crimp cycle takes less than 5 seconds with an LED light to indicate completion. The Crimp Ring Press Tool fits all PEX sizes from 3/8 in. to 1 in. The jaws of the tool fit a 1 in. ring, and die inserts for rings are included (3/8 insert not included) as well as a Go/No Go Gauge to ensure a proper crimp is achieved. Part of the Worlds Largest Platform of over 125+ tools, the ONE+ PEX Crimp Ring Press Tool is backed by the RYOBI 3-Year Manufacturer's Warranty, and includes a Go/No Go Gauge, a Belt Clip, 1/2 in. and 3/4 in. Press Die Inserts and Pouch, and an operator's manual. Battery and charger are sold separately. Easy one-handed crimping operation 320 crimps per charge using a P108 4.0 Ah LITHIUM+ High Capacity Battery (not included) LED lights indicate complete clamp cycle Dual LED lights to illuminate work space Less than 5 second crimp time for maximum efficiency Meets ASTM F1807 plumbing standard Go/No Go gauge included to ensure proper crimp is achieved Includes 1/2 in. and 3/4 in. die inserts (3/8 in. insert not included) Fits PEX crimp ring sizes 3/8 in., 1/2 in., 3/4 in., 1 in. 3-year manufacturer's warranty Includes: (1) P661 ONE+ PEX Crimp Ring Press Tool, Go/No Go gauge, belt clip, 1/2 in. and 3/4 in. press die inserts and pouch, and operators manual Battery and charger sold separately
$169.99
-
Unbranded 3 Inch Pipe Alignment Welding Lever Lock Cage Clamp
Alignment Welding Lever Lock Cage Clamp
$69.99 $41.99
-
Ryobi Ryobi P661 18-Volt ONE+ Cordless PEX Crimp Ring Press Tool (Tool Only)
RYOBI introduces the 18-Volt ONE+ PEX Crimp Ring Press Tool. With 320 crimps per charge (with the ONE+ P108 4.0 Ah LITHIUM+ Battery, not included) and an easy one-handed crimping operation, the Crimp Ring Press Tool eliminates user fatigue and allows you to get the job done faster. The crimp cycle takes less than 5 seconds with an LED light to indicate completion. The Crimp Ring Press Tool fits all PEX sizes from 3/8 in. to 1 in. The jaws of the tool fit a 1 in. ring, and die inserts for rings are included (3/8 insert not included) as well as a Go/No Go Gauge to ensure a proper crimp is achieved. Part of the Worlds Largest Platform of over 125+ tools, the ONE+ PEX Crimp Ring Press Tool is backed by the RYOBI 3-Year Manufacturer's Warranty, and includes a Go/No Go Gauge, a Belt Clip, 1/2 in. and 3/4 in. Press Die Inserts and Pouch, and an operator's manual. Battery and charger are sold separately. Easy one-handed crimping operation 320 crimps per charge using a P108 4.0 Ah LITHIUM+ High Capacity Battery (not included) LED lights indicate complete clamp cycle Dual LED lights to illuminate work space Less than 5 second crimp time for maximum efficiency Meets ASTM F1807 plumbing standard Go/No Go gauge included to ensure proper crimp is achieved Includes 1/2 in. and 3/4 in. die inserts (3/8 in. insert not included) Fits PEX crimp ring sizes 3/8 in., 1/2 in., 3/4 in., 1 in. 3-year manufacturer's warranty Includes: (1) P661 ONE+ PEX Crimp Ring Press Tool, Go/No Go gauge, belt clip, 1/2 in. and 3/4 in. press die inserts and pouch, and operators manual Battery and charger sold separately
$149.99
-
Ridgid Ridgid 914 In Place Roll Groover 2-6 Inch Pipe Tool
The RIDGID No. 914 Roll Groover is designed to man- ually form standard roll grooves on pipe or copper tube that is installed. The 914 is lightweight, only 18 lbs., and capable of grooving steel, stainless steel, PVC and aluminum pipe from 11/4′′ to 6′′. The 914 can roll groove 2′′ to 6′′ copper tube (Type K, L, M, and DWV) by chang- ing the standard roll set with the optional roll set for copper. The 1/2′′ hand ratchet rotates a feed screw that advances a groove roll into the pipe/tube to form a groove that meets specifications required for mechanical coupling systems. Pipe Capacity ................11/4′′ to 6′′ Schedule 1011/4′′ to 4′′ Schedule 40 (see Table II for wall thickness) Copper Tube Capacity ..2′′ to 6′′ OD.(Type K, L, M, DWV.) Depth Adjustment..........Feed Screw w/1/2′′ Female Drive Actuation ......................1/2′′ Ratchet for feed and rota- tion Weight ..........................18.2 lbs. (8.3 kgs.)
$179.99
-
RIDGID Ridgid 51917 508 1/2 Inch Tubing Lever Bender
Unique two-stage handle design and rollers in the bending handle combine to produce high quality bends with significantly less effort than with conventional benders Specially designed for bending stainless steel, titanium and other types of hard tubing 1/2" capacity 1-1/2" bend radius
$99.99 $59.99
-
Enerpac Enerpac RC-102 Hydraulic Cylinder 10 Ton CAP.2.13" Stroke 10000 PSI
Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke Round body with single piston rod for use in general purpose applications in any position High-strength alloy steel with baked enamel finish for corrosion resistance 10-ton cylinder capacity for lifting or pushing Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately) This Enerpac RC-102 single-acting alloy steel hydraulic cylinder with 10-ton capacity has a round body with one port and spring-return of the single piston rod with 2.13" stroke for use in general-purpose applications in any position. The single-acting hydraulic cylinder uses liquid pumped through its single port for rod extension and a pretensioned internal spring for expedited rod retraction to produce continued movement. A built-in stop ring prevents the plunger from extending beyond the stroke length, assists in absorbing side loads, and can endure the full capacity of the cylinder. The plunger wiper helps inhibit contamination in the cylinder, and the removable grooved plunger saddle covers the plunger mounting threads and protects the plunger during lifting operations. The GR2 bearings reduce wear and help prevent jamming and rod over-extension by absorbing eccentric load stresses. The port is a quick-connect CR-400 female coupler for use with a CH-604 male coupler (sold separately), and the included dust cap covers the port when not in use. The high-strength alloy steel body has a baked enamel finish for corrosion resistance in harsh environments.
$109.99
-
BVA BVA P1201 Single Speed Acting Hydraulic Hand Pump 67 IN³ Reservoir Lot of 2
Internal pressure relief valve for over load protection External load release valve for single acting cylinder usage Large oil capacities to power a wide range of cylinders and tools All hand pumps function in horizontal and vertical positions Maximum working pressure: 10,000 psi/ 700 bar
$119.99 $71.99
-
Eagle Pro Eagle Pro EPA-10921A 2-SPEED Single Acting Hydraulic Hand Pump
FEATURES:• High strength alloy steel construction for increased durability• Compact, easy to carry• All pumps are two speed design for efficient operation• Internal safety valve for overload protectionSPECIFICATIONS:• Cylinder Type: Single Acting• Speed: Two• Usable Oil Volume (in3): 55• Handle Force (lbs): 108• Oil Output Thread (in): 3/8" - 18 NPTEagle Pro EPA-10921A Single Acting Dual Speed Hydraulic Hand Pump with 55 IN3 Reservoir
$199.99 $119.99
You have seen 96 out of 114 products